What "little tweaking" did you perform exactly? ;-)
Linux fails to determine what it's IP is unless I specifically tell it
(after I figure it out based on what the Win machines were assigned by the
router.) However, I would like Linux to automatically get it's IP from the
Linksys router. Thanks in advance for your help!
----- Original Message -----
From: "Timothy R. Butler" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Sunday, January 07, 2001 9:49 PM
Subject: RE: [newbie] Drake 7.2, Linksys 4 Port router and my dang DSL
> James,
> > I have a similar setup as you. A Win2K box 2 Win98 boxen, a laptop and a
> > L-M 7.2 box. After screwing with the system for several days I ended up
> > shutting off the DHCP server in the router and set my system up with
> > hard coded IP addresses in sequence 192.168.1.2 to 192.168.1.6. I also
> > found that the Win98 box with a 10/100 (linksys) card would not work
>
> If you describe the problem, I'd be happy to see if I could help. I have
my
> dual-boot machine (Win98/Linux) and an Win98 machine both on the router
using DHCP
> without any problems to speak of. It took a little tweaking, but over all
it is
> working quite well.
>
> -Tim
>
> Merry Christmas to you from Universal Networks!
> -----------------------------------------------------------------
> Timothy R. Butler Universal Networks
> Information Tech. Consultant Christian Web Services Since 1996
> ICQ #12495932 AIM: Uninettm An Authorized IPSwitch Reseller
> [EMAIL PROTECTED] http://www.uninetsolutions.com
> ===================== "Solutions that Work" =====================
>
>
>
>
>
