If you are using a PS/2 mouse it is auto set to use Comm1 so you must set
your modem to use Comm2 which is ttyS1.
Use Windows to verify that the port to which you have physically connected
your modem is in fact Comm2.
Charles (-:
Forever never goes beyond tomorrow.
> -----Original Message-----
> From: [EMAIL PROTECTED]
> [mailto:[EMAIL PROTECTED]]On Behalf Of Michael
> Scottaline
> Sent: Friday, January 19, 2001 2:27 PM
> To: [EMAIL PROTECTED]
> Subject: Re: [newbie] Two little problems
>
>
>
> > Question 2. My computer came with a winmodem installed but I have an
> > external USR modem that I connected to one of the ports on
> the back (COMM1).
> > The problem is that ML7.2 does not know there is a modem
> connected (checked
> > Hardrake and there is nothing there, no modem is seen).
> How do I make sure
> > the ML knows there is a modem attached?
> ============================
> Are you trying to connect using kppp? If so, in setup set
> the device as ttyS0 (corresponds to Windows Com1).
> Mike
> --
> "Beer is proof that God loves us and wants us to be happy."
> -Benjamin Frankilin
>
> __________________________________________________________________
> Get your own FREE, personal Netscape Webmail account today at
http://webmail.netscape.com/
