Thanks!
I'll give it a try!
----- Original Message -----
From: "Oliver L. Plaine Jr." <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Wednesday, January 24, 2001 9:45 AM
Subject: Re: [newbie] modem problem
> On Wed, 24 Jan 2001 06:49:34 +0900,Buzz and Nan wrote:
>
> >I bought a zoom 2920 Linux compatible modem? and it's not working.
> >
> >I have been to linmodems.org and downloaded the ltmodem-5.78d.tar.gz file
> >and now it sees my modem, but no dial tone.
> -------------------
> Tue, 23 Jan 2001 18:04:38
>
> I ran cat /proc/pci to get the IRQ and the first I/O and ran
> setserial to .... set it on ttyS3 ....
>
> The major problem was conflict with a deactivated USB
> controller on the same Irq..so I had to move the card to a different
> slot...it always errored "modem is busy".
>
> run setserial -g /dev/ttyS*
>
>
> I used this setserial line
> setserial /dev/ttyS3 uart 16550A port 0xa400 irq 4
>
> With a capital S and capital A....just sub your applicable data
>
> I changed the first line on the modem string from ATZ to AT&F....
>
> are you dual booting? does it work in M$?
>
> Hook a phone to the cord at the card input and make sure the line is
> hot.... especially if you are using a new cord....
>
> I am running mdk 7.2 with 2.2.17-21
> I used nothing except what was already on the distro.
>
> Later
> Olly P
> Biloxi
>
>
