hey dan this is paul
i wrote the oriiginal message yesterday and i'm a bit confused.  i am in
quebec city so thats a bit of a problem and also i don't know how to turn of
pnp in the bios and i dont know where to enable "reset configuration data"

i am going to write to civileme and see whats going on over in France.  Get
back to me if you can help me!!
thanx again
paul




----- Original Message -----
From: "Dan LaBine" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Friday, January 23, 1998 12:54 AM
Subject: Re: [newbie] Sympatico and the D-Link 530-TX problems


> Ok, so let me get this straight. You're using Sympatico in Paris? You work
> for Mandrakesoft? And you're coming to the group for help????!!! Or am I
> getting messages from 2 different people mixed up?
>
> Dan LaBine
> Registered Linux User# 190712
>
> ----- Original Message -----
> From: Civileme <[EMAIL PROTECTED]>
> To: <[EMAIL PROTECTED]>
> Sent: Tuesday, March 27, 2001 1:09 PM
> Subject: Re: [newbie] Sympatico and the D-Link 530-TX problems
>
>
> > On Tuesday 27 March 2001 05:31, you wrote:
> > > Civilme; Where in Quebec? I'm in Montreal.There have been similar
> > > complaints from other people in the LUG  I belong to. If you're D-Link
> > > continues to give you problems, get back to me. I can arrange to have
> the
> > > card checked, and replaced with something more reliable. We've seen
lots
> of
> > > the D-Link's screw up and there was a bad batch of them around
Montreal
> for
> > > a while. Sympatico was replacing quite a few a couple of months ago.
If
> the
> > > card is good, and still won't work, we can replace it with a DLink
> 538TX,
> > > which will work fine. In the mean time, make sure that your BIOS  has
> the
> > > "Plug 'n' Play O/S" option turned off, and then "Reset Configuration
> Data"
> > > is enabled. Once you get your PC fired up, log in as root, open a
> terminal,
> > > and try "ifconfig", and also "ifup eth0" , then send the information
> back
> > > here.to the forum.
> > >
> > > Dan LaBine
> > > Registered Linux User #190712
> >
> >
> > Ummm  Well you start at the capitol building in Montreal, go one block
> south,
> > turn southwest and continue 5600 kilometers.  Wear rubber boots or you
> will
> > get wet feet.-)
> >
> > I'm at Mandrakesoft in Paris, and we were testing these D-Link cards,
> trying
> > to figure why the driver that works with the Rhine chipset doesn't work
> with
> > that specific card.
> >
> > Civileme
> >
>
>
>

Reply via email to