Derek Jennings wrote:
On Thursday 13 October 2005 15:44, Ricardo Rodriguez Peralta wrote:
SNIP
Answering to your suggestions:
- Looked under /mnt and is not listed
- Checked 'Mounted Removable Medium' under KDE's Feel and Look and is not
showing
- Checked etc/fstab and is not listed
- haldaemon service is running and starting at boot (what is this anyway?)
and have checked /var/log/syslog finding the following:
Oct 13 08:49:44 NX kernel: Initializing USB Mass Storage driver...
Oct 13 08:49:44 NX kernel: scsi0 : SCSI emulation for USB Mass Storage
devices Oct 13 08:49:44 NX kernel: usb-storage: device found at 2
Oct 13 08:49:44 NX kernel: usb-storage: waiting for device to settle
before scanning
Oct 13 08:49:44 NX kernel: usbcore: registered new driver usb-storage
Oct 13 08:49:44 NX kernel: USB Mass Storage support registered.
Oct 13 08:49:44 NX udev[13715]: run_program: exec of program failed
Oct 13 08:49:49 NX kernel: Vendor: Generic Model: Flash Disk
Rev: 7.78
Oct 13 08:49:49 NX kernel: Type: Direct-Access
ANSI SCSI revision: 02
Oct 13 08:49:49 NX kernel: Attached scsi generic sg0 at scsi0, channel
0, id 0, lun 0, type 0
Oct 13 08:49:49 NX kernel: usb-storage: device scan complete
Oct 13 08:49:49 NX kernel: SCSI device sda: 128000 512-byte hdwr sectors
(66 MB) Oct 13 08:49:49 NX kernel: sda: Write Protect is off
Oct 13 08:49:49 NX kernel: sda: Mode Sense: 03 00 00 00
Oct 13 08:49:49 NX kernel: sda: assuming drive cache: write through
Oct 13 08:49:49 NX kernel: SCSI device sda: 128000 512-byte hdwr sectors
(66 MB) Oct 13 08:49:49 NX kernel: sda: Write Protect is off
Oct 13 08:49:49 NX kernel: sda: Mode Sense: 03 00 00 00
Oct 13 08:49:49 NX kernel: sda: assuming drive cache: write through
Oct 13 08:49:49 NX kernel: /dev/scsi/host0/bus0/target0/lun0: p1
Oct 13 08:49:49 NX kernel: Attached scsi removable disk sda at scsi0,
channel 0, id 0, lun 0
Oct 13 08:49:49 NX pam_console.dev[13759]: Restoring console
permissions for /dev/sg0 /dev/scsi/host0/bus0/target0/lun0/generic
Oct 13 08:49:49 NX pam_console.dev[13767]: Restoring console
permissions for /dev/sda /dev/discs/disc1/disc
/dev/scsi/host0/bus0/target0/lun0/disc
Oct 13 08:49:49 NX pam_console.dev[13788]: Restoring console
permissions for /dev/sda1 /dev/discs/disc1/part1
/dev/scsi/host0/bus0/target0/lun0/part1
Oct 13 08:50:15 NX hald[4129]: Timed out waiting for hotplug event
1073. Rebasing to 1073
So it is going wrong in the hal process (HAL - Hardware Abstraction Layer is a
daemon that recognises new hardware and works out what to do with it)
Is the 'messagebus' service running? It is essential for hal.
derek
------------------------------------------------------------------------
____________________________________________________
Want to buy your Pack or Services from Mandriva?
Go to http://store.mandriva.com
Join the Club : http://www.mandrivaclub.com
____________________________________________________
Yes, messagebus is running at boot.
____________________________________________________
Want to buy your Pack or Services from Mandriva?
Go to http://store.mandriva.com
Join the Club : http://www.mandrivaclub.com
____________________________________________________
