I use depth 24 (theoretically identical to 32...) you could try that, but I am puzzled by your first error message: Symbol xf86InterpretEDID etc. possibly someone else may help there... Lionel --- Diego Cardinali <[EMAIL PROTECTED]> wrote: > > ----- Original Message ----- > From: Lionel Lecoq <[EMAIL PROTECTED]> > To: <[EMAIL PROTECTED]> > Sent: Friday, October 25, 2002 1:15 PM > Subject: Re: R: R: [Newbie]RedHat 7.3, S3 Trio64V+ and Sampo Alphascan 411: > monitor turns off if I try 24 bit mode > > > > You may still have 1024x768 in the mode line which could cause the problem > because X would be > > creating a virtual screen and be lacking the memory for it... > > Additionally, I don't recall which distro you have, if it is one which > generates 2 config files > > one for X 3.3.6 and the other for X 4.x.x you might be trying to hack the > wrong one. > > Check whether you are running X 4 or X 3 (check the log - > /var/log/XFree86.0.log - where you can > > also find out which config file is used) or X -version. > > Lionel > > I checked XF86Config-4, which is the one my RedHat 7.3 uses, and it is ok: > > Section "Screen" > Identifier "Screen0" > Device "S3 Trio64 (generic)" > Monitor "Sampo AlphaScan 411" > DefaultDepth 32 > Subsection "Display" > Depth 32 > Modes "800x600" > EndSubSection > Subsection "Display" > Depth 16 > Modes "1024x768" > EndSubSection > Subsection "Display" > Depth 8 > Modes "1024x768" > EndSubSection > EndSection > > I always get my monitor turned off, I use Ctrl+Alt+Backspace to exit > > I tried startx >& startx.log > > XFree86 Version 4.2.0 (Red Hat Linux release: 4.2.0-8) / X Window System > (protocol Version 11, revision 0, vendor release 6600) > Release Date: 23 January 2002 > If the server is older than 6-12 months, or if your card is > newer than the above date, look for a newer version before > reporting problems. (See http://www.XFree86.Org/) > Build Operating System: Linux 2.4.17-0.13smp i686 [ELF] > Build Host: daffy.perf.redhat.com > > Module Loader present > Markers: (--) probed, (**) from config file, (==) default setting, > (++) from command line, (!!) notice, (II) informational, > (WW) warning, (EE) error, (NI) not implemented, (??) unknown. > (==) Log file: "/var/log/XFree86.0.log", Time: Fri Oct 25 11:46:26 2002 > (==) Using config file: "/etc/X11/XF86Config-4" > Symbol xf86InterpretEDID from module /usr/X11R6/lib/modules/libvbe.a is > unresolved! > rm: impossibile rimuovere `.' o `..' > rm: impossibile rimuovere `.' o `..' > DCOPServer up and running. > Mutex destroy failure: Dispositivo o risorsa occupata > Mutex destroy failure: Dispositivo o risorsa occupata > mcop warning: user defined signal handler found for SIG_PIPE, overriding > QWidget::setMinimumSize: The smallest allowed size is (0,0) > QWidget::setMaximumSize: (unnamed/PlainClock) Negative sizes (58,-4) are not > possible > QWidget::setMinimumSize: The smallest allowed size is (0,0) > QWidget::setMaximumSize: (unnamed/QLabel) Negative sizes (61,-4) are not > possible > QWidget::setMinimumSize: The smallest allowed size is (0,0) > QWidget::setMaximumSize: (unnamed/PlainClock) Negative sizes (58,-4) are not > possible > QWidget::setMinimumSize: The smallest allowed size is (0,0) > QWidget::setMaximumSize: (unnamed/QLabel) Negative sizes (61,-4) are not > possible > QObject::connect: No such slot KWrited::block_in(const char*,int) > QObject::connect: (sender name: 'unnamed') > QObject::connect: (receiver name: 'unnamed') > ICE default IO error handler doing an exit(), pid = 881, errno = 0 > ICE default IO error handler doing an exit(), pid = 883, errno = 2 > ICE default IO error handler doing an exit(), pid = 886, errno = 0 > ICE default IO error handler doing an exit(), pid = 889, errno = 0 > ICE default IO error handler doing an exit(), pid = 891, errno = 0 > ICE default IO error handler doing an exit(), pid = 896, errno = 0 > ICE default IO error handler doing an exit(), pid = 897, errno = 0 > xinit: connection to X server lost. > kdeinit: Fatal IO error: client killed > kdeinit: sending SIGHUP to children. > KLauncher: Exiting on signal 1 > kdeinit: sending SIGTERM to children. > kdeinit: Exit. > > Thank you very much again > > > > _______________________________________________ > Newbie mailing list > [EMAIL PROTECTED] > *** To unsubscribe , or change message options, see: > http://XFree86.Org/mailman/listinfo/newbie
__________________________________________________ Do you Yahoo!? Y! Web Hosting - Let the expert host your web site http://webhosting.yahoo.com/ _______________________________________________ Newbie mailing list [EMAIL PROTECTED] *** To unsubscribe , or change message options, see: http://XFree86.Org/mailman/listinfo/newbie
