Pinched fuel line, clogged vent in gas cap, gunked up petcock filter. 3 turns out on the fuel screws. Sent via BlackBerry by AT&T
-----Original Message----- From: Double G <gary_galle...@yahoo.com> Sender: nighthawk_lovers@googlegroups.com Date: Sat, 14 Apr 2012 05:50:05 To: Nighthawk Motorcycle Lovers!<nighthawk_lovers@googlegroups.com> Reply-To: nighthawk_lovers@googlegroups.com Subject: [Nighthawk Lovers] 450 Carb adjustment Hello, Newbie here, 450 Nighthawk CA. Model loses power in each gear till in top gear on flat road w/ steady throttle rpm decrease steadily. I've checked for air leaks, tested coils, new caps, carb clean, will re-check valves, new air cleaner, cleaned slide disk and cover, new plugs. Any ideas? What is the factory setting on air screws? and what proceedure do you like for setting these carbs up? any tricks? Thanks in advance Double G -- You received this message because you are subscribed to the Google Groups "Nighthawk Motorcycle Lovers!" group. To post to this group, send email to nighthawk_lovers@googlegroups.com. To unsubscribe from this group, send email to nighthawk_lovers+unsubscr...@googlegroups.com. For more options, visit this group at http://groups.google.com/group/nighthawk_lovers?hl=en. -- You received this message because you are subscribed to the Google Groups "Nighthawk Motorcycle Lovers!" group. To post to this group, send email to nighthawk_lovers@googlegroups.com. To unsubscribe from this group, send email to nighthawk_lovers+unsubscr...@googlegroups.com. For more options, visit this group at http://groups.google.com/group/nighthawk_lovers?hl=en.
