and that's noon tomorrow (Saturday). Black powder, what's the use of black powder. Just need a guy from down under to stand on top of it with a wrench and 40 foot extension!
On May 18, 2012, at 1:51 PM, Joey Kelley wrote: > Dynamite? I thought you were still using Black Powder! :-) > -Joey > > On Fri, May 18, 2012 at 1:40 PM, Graham Rogers > <grahamjoanrog...@gmail.com> wrote: >> If that doesn't work, bring it to Graham's house about noon and 5 of us will >> get it off - (four guys to hold the bike upside down while one dynamites the >> bolt loose) Graham in PA >> >> On May 18, 2012, at 9:51 AM, Javier Garcia wrote: >> >> Try using an extension on your wrench so you can apply more torque on a >> controlled way. You could also try to find a impact wrench, although that >> sounds like an overkill for a oil pan bolt. >> I agree on the previous comment that you should buy a new bolt anyway if >> that one has taken some damage already. >> >> Javier. >> >> On Fri, May 18, 2012 at 1:43 AM, apexadam <apexa...@gmail.com> wrote: >>> >>> Good help guys! >>> I got the pic too. Thanks Paul. >>> That's the bolt I have been reefing on. I used hammer tap with vise >>> grips too and really chewed the bolt up. It is still accessible. I >>> assume counter-clockwise (left-loose). I am on my back looking up. >>> I've moved the entire bike reefing so hard (thought it might collapse >>> on me so asked my son to hold it). I am not sure I am strong enough. >>> Perhaps I should take it in to my car mechanic and see if he wont just >>> losen the bolt for me. I just went on a 30 mile ride today. Purred >>> like a kitten. Do I need to change the oil? LOL. >>> >>> Great help! Thanks guys. >>> Adam >>> >>> On May 17, 9:30 pm, "tinkrm...@yahoo.com" <tinkrm...@yahoo.com> wrote: >>>> It would be better to use a good pair of locking pliers (vise grips) if >>>> there's enough meat on the plug. Tap it sharply with a small hammer >>>> directly on the head. Get a good bind on it and it should come off when >>>> you spin it - in the right direction, of course. >>>> >>>> Sent via DroidX2 on Verizon Wireless™ >>>> >>>> >>>> >>>> >>>> >>>> >>>> >>>> -----Original message----- >>>> From: Pastor Ron <pastor...@cox.net> >>>> To: nighthawk_lovers@googlegroups.com >>>> Sent: Fri, May 18, 2012 02:31:04 GMT+00:00 >>>> Subject: RE: [Nighthawk Lovers] Re: Oil Change 2012 >>>> >>>> Also if it is chewed up and you can not get a wrench on it, last resort, >>>> you >>>> can use a chisel and a hammer to loosen it up. >>>> >>>> Ron >>>> >>>> _____ >>>> >>>> From: nighthawk_lovers@googlegroups.com >>>> [mailto:nighthawk_lovers@googlegroups.com] On Behalf Of Pastor Ron >>>> Sent: Thursday, May 17, 2012 9:28 PM >>>> To: nighthawk_lovers@googlegroups.com >>>> Subject: RE: [Nighthawk Lovers] Re: Oil Change 2012 >>>> >>>> If you chewed the nut up, you should replace it when you change the oil. >>>> Or >>>> next time it will be even worse. >>>> >>>> Ron >>>> >>>> _____ >>>> >>>> From: nighthawk_lovers@googlegroups.com >>>> [mailto:nighthawk_lovers@googlegroups.com] On Behalf Of Allen Thomas >>>> Sent: Thursday, May 17, 2012 9:21 PM >>>> To: Nightwawk Lovers >>>> Subject: Re: [Nighthawk Lovers] Re: Oil Change 2012 >>>> >>>> They added a word to the webster's dictionary a few years ago for that. >>>> The >>>> word is DOH! >>>> >>>> Sent via BlackBerry by AT&T >>>> >>>> _____ >>>> >>>> From: Kurt Nolte <vturbine.po...@gmail.com> >>>> >>>> Sender: nighthawk_lovers@googlegroups.com >>>> >>>> Date: Thu, 17 May 2012 22:14:59 -0400 >>>> >>>> To: <nighthawk_lovers@googlegroups.com> >>>> >>>> ReplyTo: nighthawk_lovers@googlegroups.com >>>> >>>> Subject: Re: [Nighthawk Lovers] Re: Oil Change 2012 >>>> >>>> It came through as both attachment and inline image for me, using >>>> e-mail. >>>> Very odd. >>>> >>>> OP: Not intended to suggest you're less than intelligent, but perhaps if >>>> you're reefing on it hard and it's not moving you're doing what I've >>>> done so >>>> often with oddly placed bolts and turning it the /wrong way/? >>>> >>>> I've had "derp" moments where >>> >>> -- >>> You received this message because you are subscribed to the Google Groups >>> "Nighthawk Motorcycle Lovers!" group. >>> To post to this group, send email to nighthawk_lovers@googlegroups.com. >>> To unsubscribe from this group, send email to >>> nighthawk_lovers+unsubscr...@googlegroups.com. >>> For more options, visit this group at >>> http://groups.google.com/group/nighthawk_lovers?hl=en. >>> >> >> >> -- >> You received this message because you are subscribed to the Google Groups >> "Nighthawk Motorcycle Lovers!" group. >> To post to this group, send email to nighthawk_lovers@googlegroups.com. >> To unsubscribe from this group, send email to >> nighthawk_lovers+unsubscr...@googlegroups.com. >> For more options, visit this group at >> http://groups.google.com/group/nighthawk_lovers?hl=en. >> >> >> -- >> You received this message because you are subscribed to the Google Groups >> "Nighthawk Motorcycle Lovers!" group. >> To post to this group, send email to nighthawk_lovers@googlegroups.com. >> To unsubscribe from this group, send email to >> nighthawk_lovers+unsubscr...@googlegroups.com. >> For more options, visit this group at >> http://groups.google.com/group/nighthawk_lovers?hl=en. > > > > -- > -Joey Kelley > JoeyKelley.com - My Life Online > JoeyFixesComputers.com - Its What I Do! > JoeyKelleyPhoto.com - Photographing Today, For Tomorrow > > -- > You received this message because you are subscribed to the Google Groups > "Nighthawk Motorcycle Lovers!" group. > To post to this group, send email to nighthawk_lovers@googlegroups.com. > To unsubscribe from this group, send email to > nighthawk_lovers+unsubscr...@googlegroups.com. > For more options, visit this group at > http://groups.google.com/group/nighthawk_lovers?hl=en. > -- You received this message because you are subscribed to the Google Groups "Nighthawk Motorcycle Lovers!" group. To post to this group, send email to nighthawk_lovers@googlegroups.com. To unsubscribe from this group, send email to nighthawk_lovers+unsubscr...@googlegroups.com. For more options, visit this group at http://groups.google.com/group/nighthawk_lovers?hl=en.