if you can get a pair of nuts on the remaining stud you can probably unscrew it from the head, Better yet buy a stud extractor an have the right tool for the job. The trick is finding a replacement stud.
On Sun, Sep 6, 2015 at 3:54 PM, Graham Rogers <grahamjoanrog...@gmail.com> wrote: > Forget the solder and JB Weld > > Sent from my iPad > > > On Sep 6, 2015, at 15:45, Alexander Press <apress...@gmail.com> wrote: > > > > Soldering attempt was futile. I went a bought some Jb weld high heat and > it was setting for maybe 3-4 hours and I tried doing some sanding on the > weld and the bolt came off pretty easily. The Jb weld was still kinda > moist. It was a bit crumbly. I'm thinking it hadn't cured totally yet. So I > redid the Jb weld and secured it with a zip tie. It's tough to get any kind > of pressure on the screw since it's so small and even a slip in any > direction jacks everything up. If this doesn't work, there is a custome > bike shop a half mile from work. I'm sure they could weld the bolt end back > onto the bit that is still sticking out of the frame. Would that work? Is > it possible to weld a broken bolt back together? I got really lucky and > where the bolt snapped, I don't even get the nut down far enough to use > those threads. It just has to be small enough to fit through the bolt hole > in the exhaust flange. > > > > I'm so mad at myself right now. > > > > -- > > You received this message because you are subscribed to the Google > Groups "Nighthawk Motorcycle Lovers!" group. > > To unsubscribe from this group and stop receiving emails from it, send > an email to nighthawk_lovers+unsubscr...@googlegroups.com. > > To post to this group, send email to nighthawk_lovers@googlegroups.com. > > Visit this group at http://groups.google.com/group/nighthawk_lovers. > > For more options, visit https://groups.google.com/d/optout. > > -- > You received this message because you are subscribed to the Google Groups > "Nighthawk Motorcycle Lovers!" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to nighthawk_lovers+unsubscr...@googlegroups.com. > To post to this group, send email to nighthawk_lovers@googlegroups.com. > Visit this group at http://groups.google.com/group/nighthawk_lovers. > For more options, visit https://groups.google.com/d/optout. > -- You received this message because you are subscribed to the Google Groups "Nighthawk Motorcycle Lovers!" group. To unsubscribe from this group and stop receiving emails from it, send an email to nighthawk_lovers+unsubscr...@googlegroups.com. To post to this group, send email to nighthawk_lovers@googlegroups.com. Visit this group at http://groups.google.com/group/nighthawk_lovers. For more options, visit https://groups.google.com/d/optout.
