is you system able to resolve correctly hostnames? Y. On Mon, 14 Mar 2011 12:01:59 +0100, "Juanjillo ." <[email protected]> wrote: > I still with dns problems. > I make to NTOP start manually, and don´t use the "-n" parameter. and i > haven´t still dns resolution. > > Any advice? > > From: [email protected] > To: [email protected] > Date: Wed, 9 Mar 2011 09:25:28 +0100 > Subject: Re: [Ntop] Question About storaged configuration > > > > > > > > > Thanks, its ok. But already have problems. > > In this file /etc/default/ntop > > Y disabled the "-n 0" parameter here (on the last line) > > # This file will normally include the debconf template but you can disable > # that and use this file only. > if [ -f /var/lib/ntop/init.cfg ]; then > . /var/lib/ntop/init.cfg > fi > # set ENABLED to 0 if you want to avoid ntop being started at system boot > ENABLED=1 > # Additional ommand line options passed when invoking ntop > # Disable DNS resolution, as it makes ntop crash > #GETOPT="-n 0" > > > Now the NTOP start good: > /usr/sbin/ntop -d -L -u ntop -P /var/lib/ntop --access-log-file -i eth0 -p > /etc/ntop/protocol.list -O /var/log/ntop > > > But i haven´t dns resolution yet. > Any advice?? > > >> From: [email protected] >> Date: Tue, 8 Mar 2011 19:00:33 +0100 >> To: [email protected] >> Subject: Re: [Ntop] Question About storaged configuration >> >> How did you install ntop? >> using a deb package? >> Probably startup params are written into >> /etc/default/ntop >> >> Regards, Yuri >> On Mar 8, 2011, at 3:41 PM, Juanjillo . wrote: >> >> > Hello. >> > >> > I need some information. >> > >> > I updated ntop to the last version on debian (4.0.3). I see the NTOP >> > Configuration page, and i see that is started as... >> > >> > /usr/sbin/ntop -d -L -u ntop -P /var/lib/ntop --access-log-file -i >> > eth0 -p /etc/ntop/protocol.list -O /var/log/ntop -n 0 >> > >> > Really i don´t define this, because the ntop daemon starts with the >> > system. >> > >> > I want to remove the "-n 0" option, because now is not resolving names. >> > >> > I go, trought the web interface, to Amin/Configure/Startup option,and >> > in the IP PREFS tab i have disabled the "-n" parameter. When restart >> > the ntop is started as usual with the "-n" parameter. >> > >> > >> > Where is stored this configuration file? >> > How i can change it? >> > >> > Thanks a lot. >> > Best regards. >> > _______________________________________________ >> > Ntop mailing list >> > [email protected] >> > http://listgateway.unipi.it/mailman/listinfo/ntop >> >> ############################################### >> Yuri Francalacci - [email protected] - http://www.ntop.org >> "Simplicity is the ultimate sophistication" - Leonardo da Vinci >> ############################################### >> >> >> >> >> >> >> >> _______________________________________________ >> Ntop mailing list >> [email protected] >> http://listgateway.unipi.it/mailman/listinfo/ntop > > > _______________________________________________ > Ntop mailing list > [email protected] > http://listgateway.unipi.it/mailman/listinfo/ntop
-- Yuri Francalacci [email protected] _______________________________________________ Ntop mailing list [email protected] http://listgateway.unipi.it/mailman/listinfo/ntop
