I'm trying to run a long running traffic monitor for my home network using the Raspberry Pi as the analyzer from a mirrored port on a Netgear GS108 Plus switch.
As I understand the ntopng architecture, ntopng needs a separate feeder to convert the packet feed from the mirrored port into NetFlow/IPFX format -- (unlike, I believe, the original ntop which had the feeder built in ). The standard ntopng tooling is to use nprobe. I can't find nprobe for the Raspberry Pi and it appears that nprobe is a proprietary tooling even if I could find it for the Pi. So my question is can I used an open source feeder? In particular is Vermont (https://github.com/constcast/vermont/wiki ) a suitable feeder for ntopng and if not are there any to be recommended ? BTW I've managed to successfully build ntopng for the Raspberry Pi (with some help from the ntop-dev list); I'm currently trying to build Vermont but it is a very slow build indeed. Thx for any help. Neil
_______________________________________________ Ntop mailing list [email protected] http://listgateway.unipi.it/mailman/listinfo/ntop
