as an fyi, I span ports right into ntopng without having to go through netflow. whats the startup commands that you are using?
On Mon, Jan 6, 2014 at 11:27 PM, Neil Bartlett <[email protected]> wrote: > I'm trying to run a long running traffic monitor for my home network using > the Raspberry Pi as the analyzer from a mirrored port on a Netgear GS108 > Plus switch. > > As I understand the ntopng architecture, ntopng needs a separate feeder to > convert the packet feed from the mirrored port into NetFlow/IPFX format -- > (unlike, I believe, the original ntop which had the feeder built in ). The > standard ntopng tooling is to use nprobe. I can't find nprobe for the > Raspberry Pi and it appears that nprobe is a proprietary tooling even if I > could find it for the Pi. > > So my question is can I used an open source feeder? In particular is Vermont > (https://github.com/constcast/vermont/wiki ) a suitable feeder for ntopng > and if not are there any to be recommended ? > > BTW I've managed to successfully build ntopng for the Raspberry Pi (with > some help from the ntop-dev list); I'm currently trying to build Vermont but > it is a very slow build indeed. > > Thx for any help. > Neil > > _______________________________________________ > Ntop mailing list > [email protected] > http://listgateway.unipi.it/mailman/listinfo/ntop > _______________________________________________ Ntop mailing list [email protected] http://listgateway.unipi.it/mailman/listinfo/ntop
