Hey all, I recently got an RMCARD205 for my Cyber UPS....
if I use no MIBS line in the config file, I get this: > Network UPS Tools - UPS driver controller 2.6.5 > Network UPS Tools - Generic SNMP UPS driver 0.68 (2.6.5) > No matching MIB found for sysOID '.1.3.6.1.4.1.3808.1.1.1'! > Please report it to NUT developers, with an 'upsc' output for your device. > Going back to the classic MIB detection method. > Detected PR1500LCDRTXL2Ua on host 192.168.125.10 (mib: cyberpower 0.1) > Network UPS Tools - Generic SNMP UPS driver 0.68 (2.6.5) > Detected SMART-UPS 3000 RM on host 192.168.125.7 (mib: apcc 1.2) > [shop] Warning: excessive poll failures, limiting error reporting > [shop] Warning: excessive poll failures, limiting error reporting If I use the mibs = cyberpower it works as somewhat expected: > > Network UPS Tools - UPS driver controller 2.6.5 > Network UPS Tools - Generic SNMP UPS driver 0.68 (2.6.5) > Detected PR1500LCDRTXL2Ua on host 192.168.125.10 (mib: cyberpower 0.1) > Network UPS Tools - Generic SNMP UPS driver 0.68 (2.6.5) > Detected SMART-UPS 3000 RM on host 192.168.125.7 (mib: apcc 1.2) > [shop] Warning: excessive poll failures, limiting error reporting > [shop] Warning: excessive poll failures, limiting error reporting but could use updating as the upsc output is kinda lacking some desired measurements (that I get with APC) ... I see the current is 2.7.x but I'm on CentOS/RH 6.x which seems to have stalled out at 2.6.5 Does 2.7 have the newer fancy MIB and I can just compile up and install manually? I'm assuming RH/CentOS 6 won't be getting anymore updates. :( I'll look around some more for an RPM for 6.x Cheers, -Ben Also, when I go to : http://networkupstools.org/docs/man/snmp-ups.html and click on the link at the bottom: http://www.networkupstools.org/protocols/snmp/ I get a 404 error. (just an FYI) _______________________________________________ Nut-upsdev mailing list [email protected] http://lists.alioth.debian.org/cgi-bin/mailman/listinfo/nut-upsdev
