On 10 June 2017 23:26:47 EEST, Tim Dawson <[email protected]> wrote: >Build from source, and done . . . wasting your time looking for a less >out of date RPM is pointless. . . RPM, .deb, etc are almost always >downrev. . . > >- Tim > >On June 10, 2017 2:06:42 PM CDT, Ben Kamen <[email protected]> wrote: >>Hey all, >> >> I recently got an RMCARD205 for my Cyber UPS.... >> >>if I use no MIBS line in the config file, I get this: >> >> >>> Network UPS Tools - UPS driver controller 2.6.5 >>> Network UPS Tools - Generic SNMP UPS driver 0.68 (2.6.5) >>> No matching MIB found for sysOID '.1.3.6.1.4.1.3808.1.1.1'! >>> Please report it to NUT developers, with an 'upsc' output for your >>device. >>> Going back to the classic MIB detection method. >>> Detected PR1500LCDRTXL2Ua on host 192.168.125.10 (mib: cyberpower >>0.1) >>> Network UPS Tools - Generic SNMP UPS driver 0.68 (2.6.5) >>> Detected SMART-UPS 3000 RM on host 192.168.125.7 (mib: apcc 1.2) >>> [shop] Warning: excessive poll failures, limiting error reporting >>> [shop] Warning: excessive poll failures, limiting error reporting >> >>If I use the mibs = cyberpower >> >>it works as somewhat expected: >> >>> >>> Network UPS Tools - UPS driver controller 2.6.5 >>> Network UPS Tools - Generic SNMP UPS driver 0.68 (2.6.5) >>> Detected PR1500LCDRTXL2Ua on host 192.168.125.10 (mib: cyberpower >>0.1) >>> Network UPS Tools - Generic SNMP UPS driver 0.68 (2.6.5) >>> Detected SMART-UPS 3000 RM on host 192.168.125.7 (mib: apcc 1.2) >>> [shop] Warning: excessive poll failures, limiting error reporting >>> [shop] Warning: excessive poll failures, limiting error reporting >> >> >>but could use updating as the upsc output is kinda lacking some >desired >>measurements (that I get with APC) ... I see the current is 2.7.x but >>I'm on CentOS/RH 6.x which seems to have stalled out at 2.6.5 >> >>Does 2.7 have the newer fancy MIB and I can just compile up and >install >>manually? >> >>I'm assuming RH/CentOS 6 won't be getting anymore updates. :( >> >>I'll look around some more for an RPM for 6.x >> >>Cheers, >> >> -Ben >> >> >>Also, >> >>when I go to : http://networkupstools.org/docs/man/snmp-ups.html and >>click on the link at the bottom: >>http://www.networkupstools.org/protocols/snmp/ I get a 404 error. >(just >>an FYI) >> >>_______________________________________________ >>Nut-upsdev mailing list >>[email protected] >>http://lists.alioth.debian.org/cgi-bin/mailman/listinfo/nut-upsdev
I can upload to http://wolfy .fedorapeople org the packages I built for 2.7.4, if you are willing to test them. I am using them for several months. Wolfy _______________________________________________ Nut-upsdev mailing list [email protected] http://lists.alioth.debian.org/cgi-bin/mailman/listinfo/nut-upsdev
