[EMAIL PROTECTED] wrote:
> I can confirm that there is no problem with the UPS and the power line is
> stable. I have attached the relevant log file for a run.
Please try if adding the following lines to 'ups.conf' make any
difference (you'd need to restart the driver in order to make these
effective):
pollfreq = 5
pollinterval = 10
Chances are that the behaviour will be different, since it will not use
the light polling mode of the driver, but instead will query for all
variables. Since this is a lot more verbose, you need to reduce the
polling interval to something in the order of 10 seconds. If this works,
you may wish to fiddle with the values, as long as you make sure that
pollfreq < pollinterval.
Another thing to check is the latest version from the SVN trunk. Note
that the driver has been renamed to 'usbhid-ups' there.
Best regards, Arjen
_______________________________________________
Nut-upsuser mailing list
Nut-upsuser@lists.alioth.debian.org
http://lists.alioth.debian.org/mailman/listinfo/nut-upsuser
