Kevin <bakdong <at> gmail.com> writes: > > on 19/01/2011 15:31 Arjen de Korte wrote: > > Please also post the output of 'upsc upsname' (see 'man 8 upsc') and > > 'upscmd -l upsname' (see 'man 8 upscmd') for both devices, so that we > > can see which commands are detected.
APC Smart-UPS 1000 # clients/upsc apc1500 battery.charge: 100 battery.charge.low: 10 battery.charge.warning: 50 battery.mfr.date: 2007/07/07 battery.runtime: 5880 battery.runtime.low: 120 battery.temperature: 31.5 battery.type: PbAc battery.voltage: 27.4 battery.voltage.nominal: 24.0 driver.name: usbhid-ups driver.parameter.pollfreq: 30 driver.parameter.pollinterval: 2 driver.parameter.port: auto driver.version: 2.4.1 driver.version.data: APC HID 0.93 driver.version.internal: 0.34 input.voltage: 224.6 output.voltage: 224.6 output.voltage.nominal: 230.0 ups.beeper.status: disabled ups.delay.shutdown: 20 ups.firmware: 652.13.I ups.firmware.aux: 7.3 ups.load: 5.8 ups.mfr: American Power Conversion ups.mfr.date: 2007/07/07 ups.model: Smart-UPS 1000 ups.productid: 0002 ups.serial: AS0727233122 ups.status: OL ups.test.result: No test initiated ups.timer.reboot: -1 ups.timer.shutdown: -1 ups.vendorid: 051d # ./clients/upscmd -l apc1500 Instant commands supported on UPS [apc1500]: beeper.disable - Description unavailable beeper.enable - Description unavailable beeper.mute - Description unavailable beeper.off - Description unavailable beeper.on - Description unavailable load.off - Description unavailable load.off.delay - Description unavailable load.on - Description unavailable load.on.delay - Description unavailable shutdown.reboot - Description unavailable shutdown.return - Description unavailable shutdown.stayoff - Description unavailable shutdown.stop - Description unavailable test.battery.start.deep - Description unavailable test.battery.start.quick - Description unavailable test.battery.stop - Description unavailable test.panel.start - Description unavailable test.panel.stop - Description unavailable APC CS 500 # clients/upsc apc1500 battery.charge: 100 battery.charge.low: 10 battery.charge.warning: 50 battery.date: 2010/09/19 battery.mfr.date: 2010/09/19 battery.runtime: 3877 battery.runtime.low: 120 battery.temperature: 29.2 battery.type: PbAc battery.voltage: 13.6 battery.voltage.nominal: 12.0 device.mfr: American Power Conversion device.model: Back-UPS CS 500 device.serial: 4B1038P51197 device.type: ups driver.name: usbhid-ups driver.parameter.pollfreq: 30 driver.parameter.pollinterval: 2 driver.parameter.port: auto driver.version: 2.6.0 driver.version.data: APC HID 0.95 driver.version.internal: 0.35 input.sensitivity: medium input.voltage: 224.0 input.voltage.nominal: 230 output.voltage: 230.0 output.voltage.nominal: 230.0 ups.beeper.status: enabled ups.delay.shutdown: 20 ups.delay.start: 30 ups.firmware: 808.q10 .I ups.firmware.aux: q10 ups.load: 0.0 ups.mfr: American Power Conversion ups.mfr.date: 2010/09/19 ups.model: Back-UPS CS 500 ups.productid: 0002 ups.serial: 4B1038P51197 ups.status: OL ups.test.result: No test initiated ups.timer.reboot: 0 ups.timer.shutdown: -1 ups.timer.start: 0 ups.vendorid: 051d # ./clients/upscmd -l apc1500 Instant commands supported on UPS [apc1500]: beeper.disable - Description unavailable beeper.enable - Description unavailable beeper.mute - Description unavailable beeper.off - Description unavailable beeper.on - Description unavailable load.off - Description unavailable load.off.delay - Description unavailable load.on - Description unavailable load.on.delay - Description unavailable shutdown.reboot - Description unavailable shutdown.return - Description unavailable shutdown.stayoff - Description unavailable shutdown.stop - Description unavailable test.battery.start.deep - Description unavailable test.battery.start.quick - Description unavailable test.battery.stop - Description unavailable test.panel.start - Description unavailable test.panel.stop - Description unavailable > > It may be a log easier to do the testing with the upscmd > > 'shutdown.return' (Smart-UPS 1000) and 'shutdown.reboot' (CS-500) > > while the upsd server is running. During testing, it allows you to run > > an instance of upslog (see 'man 8 upslog') so that you'll be able to > > see the 'ups.timer.*' variables counting down. I suspect that the > > current mapping might be wrong. > > > > Also note that the (re)start delay set in the Smart-UPS 1000 is > > presently set to 180 seconds, so you may have to wait a little longer > > that expected for the output to be switched on after the power returns. > > > Thanks Arjen. I've spent a little more time on it today and can confirm > that shutdown.reboot works as expected with the Smart-UPS 1000. (I only > tested this by commenting out the shutdown.return code in the usbhid-ups > driver) I will try with the upscmd command tomorrow. > > This matches and confirms the behaviour of the 2.4 versions. On the Smart-UPS 1000, all the instant commands do more or less what you would expect. Looking at the timers using "upsc apc1500" I now see that: shutdown. load.off/load.off.delay both set the shutdown timer to 90, shuts down after 90 seconds reboot sets the reboot timer to 90, sleeps after 90 seconds return immediately switches to battery for a moment, sets both shutdown and startup to 90 seconds, sleeps after 90 seconds test.panel and beeper commands also work as expected. So you are right, it does seem to be working on this model. I don't know why I didn't see this when I was testing originally. Also I don't understand why the shutdown.return, which seems to be translated to "load.on.delay, load.off.delay" is used in preference to the "shutdown.reboot" command. > I haven't been able to get the CS 500 into sleep mode at all, apart from > by using the old hidups driver that I modified to setvalue(0x86007c, 1) > The 2.6 version shutdown.reboot definitely does not work - it doesn't > seem to have any effect at all. On the CS 500 the load.off switches it off immediately, the load.off delay, shutdown.return and shutdown.stayoff all switch to battery, and set the shutdown timer to 20 seconds and then shuts down after that time. (Never restarts) The beeper commands work, as does the shutdown.stop (sets the shutdown timer to -1) Regards, Kevin. _______________________________________________ Nut-upsuser mailing list Nut-upsuser@lists.alioth.debian.org http://lists.alioth.debian.org/mailman/listinfo/nut-upsuser