I didn't want to sign up for the nut-devs list or create a git account just to provide this information, so I hope posting this info here is OK...
I just bought a Cyber Power Systems EC750G UPS for use as a spare. Here are some info for it: ========================= upsc output: battery.charge: 100 battery.charge.low: 10 battery.charge.warning: 20 battery.mfr.date: CPS battery.runtime: 2475 battery.runtime.low: 300 battery.type: PbAcid battery.voltage: 14.2 battery.voltage.nominal: 12 device.mfr: CPS device.model: EC750G device.type: ups driver.name: usbhid-ups driver.parameter.pollfreq: 30 driver.parameter.pollinterval: 2 driver.parameter.port: auto driver.parameter.synchronous: no driver.version: 2.7.4 driver.version.data: CyberPower HID 0.4 driver.version.internal: 0.41 input.transfer.high: 140 input.transfer.low: 96 input.voltage: 120.0 input.voltage.nominal: 120 output.voltage: 120.0 ups.beeper.status: enabled ups.delay.shutdown: 20 ups.delay.start: 30 ups.load: 18 ups.mfr: CPS ups.model: EC750G ups.productid: 0501 ups.realpower.nominal: 450 ups.status: OL ups.test.result: No test initiated ups.timer.shutdown: -60 ups.timer.start: 0 ups.vendorid: 0764 ========================================= upsrw output: [battery.charge.low] Remaining battery level when UPS switches to LB (percent) Type: STRING Maximum length: 10 Value: 10 [battery.runtime.low] Remaining battery runtime when UPS switches to LB (seconds) Type: STRING Maximum length: 10 Value: 300 [input.transfer.high] High voltage transfer point (V) Type: STRING Maximum length: 10 Value: 140 [input.transfer.low] Low voltage transfer point (V) Type: STRING Maximum length: 10 Value: 96 [ups.delay.shutdown] Interval to wait after shutdown with delay command (seconds) Type: STRING Maximum length: 10 Value: 20 [ups.delay.start] Interval to wait before (re)starting the load (seconds) Type: STRING Maximum length: 10 Value: 30 =========================== upscmd output: Instant commands supported on UPS [myups]: beeper.disable - Disable the UPS beeper beeper.enable - Enable the UPS beeper beeper.mute - Temporarily mute the UPS beeper beeper.off - Obsolete (use beeper.disable or beeper.mute) beeper.on - Obsolete (use beeper.enable) load.off - Turn off the load immediately load.off.delay - Turn off the load with a delay (seconds) load.on - Turn on the load immediately load.on.delay - Turn on the load with a delay (seconds) shutdown.return - Turn off the load and return when power is back shutdown.stayoff - Turn off the load and remain off shutdown.stop - Stop a shutdown in progress test.battery.start.deep - Start a deep battery test test.battery.start.quick - Start a quick battery test test.battery.stop - Stop the battery test ================================== log messages during shutdown: Dec 8 13:08:14 ftest upsmon[2949]: UPS myups@localhost on battery Dec 8 13:14:24 ftest upsmon[2949]: UPS myups@localhost battery is low Dec 8 13:14:24 ftest upsmon[2949]: Executing automatic power-fail shutdown Dec 8 13:14:24 ftest upsmon[2949]: Auto logout and shutdown proceeding Dec 8 13:14:29 ftest shutdown: power-down by mike: ==================================== Manufacturer's webpage: https://www.cyberpowersystems.com/products/ups/desktop/ec750g ==================================== Misc. The result of the command upscmd -u user -p password myups load.off.delay 300 is an immediate power-off, no delay. ==================================== Let me know if there's any other info that would be useful.... _______________________________________________ Nut-upsuser mailing list Nut-upsuser@lists.alioth.debian.org http://lists.alioth.debian.org/cgi-bin/mailman/listinfo/nut-upsuser