Here is the output: ls -lR /sys/kernel/config/cluster /sys/kernel/config/cluster: total 0 drwxr-xr-x 4 root root 0 Oct 19 00:12 CLUSTER
/sys/kernel/config/cluster/CLUSTER: total 0 -rw-r--r-- 1 root root 4096 Oct 19 00:12 fence_method drwxr-xr-x 3 root root 0 Oct 19 00:12 heartbeat -rw-r--r-- 1 root root 4096 Oct 19 00:12 idle_timeout_ms -rw-r--r-- 1 root root 4096 Oct 19 00:12 keepalive_delay_ms drwxr-xr-x 4 root root 0 Oct 11 20:23 node -rw-r--r-- 1 root root 4096 Oct 19 00:12 reconnect_delay_ms /sys/kernel/config/cluster/CLUSTER/heartbeat: total 0 drwxr-xr-x 2 root root 0 Oct 19 00:12 918673F06F8F4ED188DDCE14F39945F6 -rw-r--r-- 1 root root 4096 Oct 19 00:12 dead_threshold /sys/kernel/config/cluster/CLUSTER/heartbeat/918673F06F8F4ED188DDCE14F39945F6: total 0 -rw-r--r-- 1 root root 4096 Oct 19 00:12 block_bytes -rw-r--r-- 1 root root 4096 Oct 19 00:12 blocks -rw-r--r-- 1 root root 4096 Oct 19 00:12 dev -r--r--r-- 1 root root 4096 Oct 19 00:12 pid -rw-r--r-- 1 root root 4096 Oct 19 00:12 start_block /sys/kernel/config/cluster/CLUSTER/node: total 0 drwxr-xr-x 2 root root 0 Oct 19 00:12 ro02xsrv001 drwxr-xr-x 2 root root 0 Oct 19 00:12 ro02xsrv002 /sys/kernel/config/cluster/CLUSTER/node/ro02xsrv001: total 0 -rw-r--r-- 1 root root 4096 Oct 19 00:12 ipv4_address -rw-r--r-- 1 root root 4096 Oct 19 00:12 ipv4_port -rw-r--r-- 1 root root 4096 Oct 19 00:12 local -rw-r--r-- 1 root root 4096 Oct 19 00:12 num /sys/kernel/config/cluster/CLUSTER/node/ro02xsrv002: total 0 -rw-r--r-- 1 root root 4096 Oct 19 00:12 ipv4_address -rw-r--r-- 1 root root 4096 Oct 19 00:12 ipv4_port -rw-r--r-- 1 root root 4096 Oct 19 00:12 local -rw-r--r-- 1 root root 4096 Oct 19 00:12 num On 10/19/2011 00:12, Sunil Mushran wrote: > ls -lR /sys/kernel/config/cluster > > What does this return? > > On 10/18/2011 02:05 PM, Laurentiu Gosu wrote: >> Hi, >> I have a 2 nodes ocfs2 cluster running UEK 2.6.32-100.0.19.el5, >> ocfs2console-1.6.3-2.el5, ocfs2-tools-1.6.3-2.el5. >> My problem is that all the time when i try to run /etc/init.d/o2cb stop >> it fails with this error: >> Stopping O2CB cluster CLUSTER: Failed >> Unable to stop cluster as heartbeat region still active >> There is no active mount point. I tried to manually stop the heartdbeat >> with "ocfs2_hb_ctl -K -d /dev/mapper/volgr1-lvol0 ocfs2" (after finding >> the refs number with "ocfs2_hb_ctl -I -d /dev/mapper/volgr1-lvol0 "). >> But even if refs number is set to zero the "heartbeat region still >> active" occurs. >> How can i fix this? >> >> Thank you in advance. >> Laurentiu. >> >> >> _______________________________________________ >> Ocfs2-users mailing list >> Ocfs2-users@oss.oracle.com >> http://oss.oracle.com/mailman/listinfo/ocfs2-users > _______________________________________________ Ocfs2-users mailing list Ocfs2-users@oss.oracle.com http://oss.oracle.com/mailman/listinfo/ocfs2-users