ls -lR /sys/kernel/debug/ocfs2 /sys/kernel/debug/ocfs2: total 0 ls -lR /sys/kernel/debug/o2dlm /sys/kernel/debug/o2dlm: total 0
ocfs2_hb_ctl -I -d /dev/dm-2 ocfs2_hb_ctl: Device name specified was not found while reading uuid There is no /dev/dm-2 mounted. On 10/19/2011 00:27, Sunil Mushran wrote: > mount -t debugfs debugfs /sys/kernel/debug > > Then list that dir. > > Also, do: > ocfs2_hb_ctl -l -d /dev/dm-2 > > Be careful before killing. We want to be sure that dev is not mounted. > > On 10/18/2011 02:23 PM, Laurentiu Gosu wrote: >> Again the outputs: >> cat >> /sys/kernel/config/cluster/CLUSTER/heartbeat/918673F06F8F4ED188DDCE14F39945F6/dev >> dm-2 >> --->here should be volgr1-lvol0 i guess? >> >> ls -lR /sys/kernel/debug/ocfs2 >> ls: /sys/kernel/debug/ocfs2: No such file or directory >> >> ls -lR /sys/kernel/debug/o2dlm >> ls: /sys/kernel/debug/o2dlm: No such file or directory >> >> I think i have to enable debug first somehow..? >> >> Laurentiu. >> >> On 10/19/2011 00:17, Sunil Mushran wrote: >>> What does this return? >>> cat >>> /sys/kernel/config/cluster/CLUSTER/heartbeat/918673F06F8F4ED188DDCE14F39945F6/dev >>> >>> Also, do: >>> ls -lR /sys/kernel/debug/ocfs2 >>> ls -lR /sys/kernel/debug/o2dlm >>> >>> On 10/18/2011 02:14 PM, Laurentiu Gosu wrote: >>>> Here is the output: >>>> >>>> ls -lR /sys/kernel/config/cluster >>>> /sys/kernel/config/cluster: >>>> total 0 >>>> drwxr-xr-x 4 root root 0 Oct 19 00:12 CLUSTER >>>> >>>> /sys/kernel/config/cluster/CLUSTER: >>>> total 0 >>>> -rw-r--r-- 1 root root 4096 Oct 19 00:12 fence_method >>>> drwxr-xr-x 3 root root 0 Oct 19 00:12 heartbeat >>>> -rw-r--r-- 1 root root 4096 Oct 19 00:12 idle_timeout_ms >>>> -rw-r--r-- 1 root root 4096 Oct 19 00:12 keepalive_delay_ms >>>> drwxr-xr-x 4 root root 0 Oct 11 20:23 node >>>> -rw-r--r-- 1 root root 4096 Oct 19 00:12 reconnect_delay_ms >>>> >>>> /sys/kernel/config/cluster/CLUSTER/heartbeat: >>>> total 0 >>>> drwxr-xr-x 2 root root 0 Oct 19 00:12 >>>> 918673F06F8F4ED188DDCE14F39945F6 >>>> -rw-r--r-- 1 root root 4096 Oct 19 00:12 dead_threshold >>>> >>>> /sys/kernel/config/cluster/CLUSTER/heartbeat/918673F06F8F4ED188DDCE14F39945F6: >>>> >>>> >>>> total 0 >>>> -rw-r--r-- 1 root root 4096 Oct 19 00:12 block_bytes >>>> -rw-r--r-- 1 root root 4096 Oct 19 00:12 blocks >>>> -rw-r--r-- 1 root root 4096 Oct 19 00:12 dev >>>> -r--r--r-- 1 root root 4096 Oct 19 00:12 pid >>>> -rw-r--r-- 1 root root 4096 Oct 19 00:12 start_block >>>> >>>> /sys/kernel/config/cluster/CLUSTER/node: >>>> total 0 >>>> drwxr-xr-x 2 root root 0 Oct 19 00:12 ro02xsrv001 >>>> drwxr-xr-x 2 root root 0 Oct 19 00:12 ro02xsrv002 >>>> >>>> /sys/kernel/config/cluster/CLUSTER/node/ro02xsrv001: >>>> total 0 >>>> -rw-r--r-- 1 root root 4096 Oct 19 00:12 ipv4_address >>>> -rw-r--r-- 1 root root 4096 Oct 19 00:12 ipv4_port >>>> -rw-r--r-- 1 root root 4096 Oct 19 00:12 local >>>> -rw-r--r-- 1 root root 4096 Oct 19 00:12 num >>>> >>>> /sys/kernel/config/cluster/CLUSTER/node/ro02xsrv002: >>>> total 0 >>>> -rw-r--r-- 1 root root 4096 Oct 19 00:12 ipv4_address >>>> -rw-r--r-- 1 root root 4096 Oct 19 00:12 ipv4_port >>>> -rw-r--r-- 1 root root 4096 Oct 19 00:12 local >>>> -rw-r--r-- 1 root root 4096 Oct 19 00:12 num >>>> >>>> >>>> >>>> >>>> On 10/19/2011 00:12, Sunil Mushran wrote: >>>>> ls -lR /sys/kernel/config/cluster >>>>> >>>>> What does this return? >>>>> >>>>> On 10/18/2011 02:05 PM, Laurentiu Gosu wrote: >>>>>> Hi, >>>>>> I have a 2 nodes ocfs2 cluster running UEK 2.6.32-100.0.19.el5, >>>>>> ocfs2console-1.6.3-2.el5, ocfs2-tools-1.6.3-2.el5. >>>>>> My problem is that all the time when i try to run >>>>>> /etc/init.d/o2cb stop >>>>>> it fails with this error: >>>>>> Stopping O2CB cluster CLUSTER: Failed >>>>>> Unable to stop cluster as heartbeat region still active >>>>>> There is no active mount point. I tried to manually stop the >>>>>> heartdbeat >>>>>> with "ocfs2_hb_ctl -K -d /dev/mapper/volgr1-lvol0 ocfs2" (after >>>>>> finding >>>>>> the refs number with "ocfs2_hb_ctl -I -d /dev/mapper/volgr1-lvol0 >>>>>> "). >>>>>> But even if refs number is set to zero the "heartbeat region still >>>>>> active" occurs. >>>>>> How can i fix this? >>>>>> >>>>>> Thank you in advance. >>>>>> Laurentiu. >>>>>> >>>>>> >>>>>> _______________________________________________ >>>>>> Ocfs2-users mailing list >>>>>> Ocfs2-users@oss.oracle.com >>>>>> http://oss.oracle.com/mailman/listinfo/ocfs2-users >>>>> >>>> >>> >> > _______________________________________________ Ocfs2-users mailing list Ocfs2-users@oss.oracle.com http://oss.oracle.com/mailman/listinfo/ocfs2-users