What does this return? cat /sys/kernel/config/cluster/CLUSTER/heartbeat/918673F06F8F4ED188DDCE14F39945F6/dev
Also, do: ls -lR /sys/kernel/debug/ocfs2 ls -lR /sys/kernel/debug/o2dlm On 10/18/2011 02:14 PM, Laurentiu Gosu wrote: > Here is the output: > > ls -lR /sys/kernel/config/cluster > /sys/kernel/config/cluster: > total 0 > drwxr-xr-x 4 root root 0 Oct 19 00:12 CLUSTER > > /sys/kernel/config/cluster/CLUSTER: > total 0 > -rw-r--r-- 1 root root 4096 Oct 19 00:12 fence_method > drwxr-xr-x 3 root root 0 Oct 19 00:12 heartbeat > -rw-r--r-- 1 root root 4096 Oct 19 00:12 idle_timeout_ms > -rw-r--r-- 1 root root 4096 Oct 19 00:12 keepalive_delay_ms > drwxr-xr-x 4 root root 0 Oct 11 20:23 node > -rw-r--r-- 1 root root 4096 Oct 19 00:12 reconnect_delay_ms > > /sys/kernel/config/cluster/CLUSTER/heartbeat: > total 0 > drwxr-xr-x 2 root root 0 Oct 19 00:12 918673F06F8F4ED188DDCE14F39945F6 > -rw-r--r-- 1 root root 4096 Oct 19 00:12 dead_threshold > > /sys/kernel/config/cluster/CLUSTER/heartbeat/918673F06F8F4ED188DDCE14F39945F6: > total 0 > -rw-r--r-- 1 root root 4096 Oct 19 00:12 block_bytes > -rw-r--r-- 1 root root 4096 Oct 19 00:12 blocks > -rw-r--r-- 1 root root 4096 Oct 19 00:12 dev > -r--r--r-- 1 root root 4096 Oct 19 00:12 pid > -rw-r--r-- 1 root root 4096 Oct 19 00:12 start_block > > /sys/kernel/config/cluster/CLUSTER/node: > total 0 > drwxr-xr-x 2 root root 0 Oct 19 00:12 ro02xsrv001 > drwxr-xr-x 2 root root 0 Oct 19 00:12 ro02xsrv002 > > /sys/kernel/config/cluster/CLUSTER/node/ro02xsrv001: > total 0 > -rw-r--r-- 1 root root 4096 Oct 19 00:12 ipv4_address > -rw-r--r-- 1 root root 4096 Oct 19 00:12 ipv4_port > -rw-r--r-- 1 root root 4096 Oct 19 00:12 local > -rw-r--r-- 1 root root 4096 Oct 19 00:12 num > > /sys/kernel/config/cluster/CLUSTER/node/ro02xsrv002: > total 0 > -rw-r--r-- 1 root root 4096 Oct 19 00:12 ipv4_address > -rw-r--r-- 1 root root 4096 Oct 19 00:12 ipv4_port > -rw-r--r-- 1 root root 4096 Oct 19 00:12 local > -rw-r--r-- 1 root root 4096 Oct 19 00:12 num > > > > > On 10/19/2011 00:12, Sunil Mushran wrote: >> ls -lR /sys/kernel/config/cluster >> >> What does this return? >> >> On 10/18/2011 02:05 PM, Laurentiu Gosu wrote: >>> Hi, >>> I have a 2 nodes ocfs2 cluster running UEK 2.6.32-100.0.19.el5, >>> ocfs2console-1.6.3-2.el5, ocfs2-tools-1.6.3-2.el5. >>> My problem is that all the time when i try to run /etc/init.d/o2cb stop >>> it fails with this error: >>> Stopping O2CB cluster CLUSTER: Failed >>> Unable to stop cluster as heartbeat region still active >>> There is no active mount point. I tried to manually stop the heartdbeat >>> with "ocfs2_hb_ctl -K -d /dev/mapper/volgr1-lvol0 ocfs2" (after finding >>> the refs number with "ocfs2_hb_ctl -I -d /dev/mapper/volgr1-lvol0 "). >>> But even if refs number is set to zero the "heartbeat region still >>> active" occurs. >>> How can i fix this? >>> >>> Thank you in advance. >>> Laurentiu. >>> >>> >>> _______________________________________________ >>> Ocfs2-users mailing list >>> Ocfs2-users@oss.oracle.com >>> http://oss.oracle.com/mailman/listinfo/ocfs2-users >> > _______________________________________________ Ocfs2-users mailing list Ocfs2-users@oss.oracle.com http://oss.oracle.com/mailman/listinfo/ocfs2-users