We're using the gen2 SRP target (git://git.openfabrics.org/~vu/srpt.git)
Erez Cohen wrote: > Erez, > > What target are you using? > > Best regards, > > Erez Cohen > Field Application > Development Manager > > Mellanox Technologies Ltd. > Tel : + 972 - 4 - 9097200 ext 378 > Cell : + 972 - 54 - 5468801 > Fax : + 972 - 4 - 9593245 > www.mellanox.com > > -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] On Behalf Of Erez Zilber > Sent: Wednesday, May 30, 2007 12:06 PM > To: Tzachi Dar > Cc: [email protected] > Subject: Re: [ofw] Cannot start SRP initiator > > Tzachi Dar wrote: > > >> >> >> >> >>> -----Original Message----- >>> From: Erez Zilber [mailto:[EMAIL PROTECTED] >>> Sent: Tuesday, May 29, 2007 7:13 PM >>> To: Tzachi Dar >>> Cc: [email protected] >>> Subject: Re: [ofw] Cannot start SRP initiator >>> >>> I'm using WinIB from Mellanox's site. I don't know if it's a >>> free/checked build. I could not find hklm\system\current control >>> set\services\srp. >>> >>> >> The default build that you have is free. In order to have a checked >> build you can do one of the following; >> 1) build it your self :-) >> 2) go to the same page on the Mellanox site and you fill find a zip >> file with symbols. This file contains all the checked binaries as well >> > > >> so you can copy srp.sys from the checked directory to the >> system32\drivers directory. >> >> >> >> > It seems that the path has changed to hklm\system\current control > set\services\ibsrp\Parameters. I can see it now. The current values are: > > DebugFlags = ffffff > DebugLevel = 2 > > What should I put there in order to see the required logs? > > BTW - maybe it's a good idea to put this info in the SRP wiki page. > >>> Also, I found the following in the release notes: >>> >>> >>> To complete the SRP driver installation, an SRP target must be >>> detected and a Subnet Manager must be running in the subnet. >>> >>> Upon the detection of an SRP target, the "New Hardware Found" >>> Wizard pops up. >>> >>> > > I can see "Mellanox referenced SRP target" under "SCSI and RAID > controllers" in the device manager. Does it mean that the initiator > machine "sees" the SRP target? Anyway, it has the following error: > > Windows cannot start this hardware device because its configuration > information (in the registry) is incomplete or damaged. (Code 19) > > Again, please tell me what should I do in order to supply more info > about it. > > >>> - Select Install Automatically and click Next. This installs the I/O >>> unit >>> device. >>> >>> Once completed, the "New Hardware Found" Wizard pops up again. >>> - Select Install Automatically and click Next. This installs the SRP >>> driver. >>> >>> I can ping my srpt machine over IPoIB. However, I didn't get any "New >>> > > >>> Hardware Found" Wizard. >>> Did I miss anything? >>> >>> >> Are you using windows xp32 bit? SRP doesn't work there. >> >> > > No, I'm using win 2003 > >> If not, can you go to the device manager and do scan for HW changes? >> This should help. >> If this doesn't help than your problem is probably at the bus driver >> at the code that should create the virtual device and not at the SRP >> itself that is not loaded. >> > > _______________________________________________ > ofw mailing list > [email protected] > http://lists.openfabrics.org/cgi-bin/mailman/listinfo/ofw > _______________________________________________ ofw mailing list [email protected] http://lists.openfabrics.org/cgi-bin/mailman/listinfo/ofw
