Hi Pierre,

It's not obvious, but you can get newer gcc versions for CentOS/RHEL via
the devtoolset packages in the scl repo, e.g.:
https://www.softwarecollections.org/en/scls/rhscl/devtoolset-3/

They install in /opt, so you'll need to either set CC/CXX or use the scl
enable command as documented in the link.

cheers,
-Mark

On Thu, Jul 21, 2016 at 3:23 PM, Pierre Guerin <
[email protected]> wrote:

> Hi Will,
>
>
>
> You’re close.  Not a Flame but an Arriscan running on a SunFire server.
> The platform is no longer updated by Arri but it runs just fine.
>
>
>
> Cheers!
>
>
>
> Pierre
>
>
>
> *De :* Oiio-dev [mailto:[email protected]] *De la
> part de* Will Rosecrans
> *Envoyé :* 20 juillet 2016 19:38
> *À :* OpenImageIO developers
> *Objet :* Re: [Oiio-dev] No atomics on this platform
>
>
>
> Stab in the dark, but are you keeping an old xw8600 Flame alive?  You may
> be able to use your old gcc to install a modern gcc from source if you run
> out of better ideas.  I usually just tried to make sure Flame Ops stuck
> with classic hardware had access to a "normal" Linux workstations for
> running non-Flame parts of the internal software stack.  An extra
> workstation usually proved easier than maintaining an RHEL4 port of
> everything even a few years ago.  :/
>
>
>
> On Wed, Jul 20, 2016 at 2:22 PM, Pierre Guerin <
> [email protected]> wrote:
>
> Hello,
>
>
>
> I tried to build oiio on RHEL 4.8  on an Opteron 64 bit platform but I get
> the error « No atomics on this platform » when building
> OpenImageIO_Util.dir/errorhandler.cpp.  Do anyone know what the issue could
> be?
>
>
>
> Pierre
>
>
>
>
> _______________________________________________
> Oiio-dev mailing list
> [email protected]
> http://lists.openimageio.org/listinfo.cgi/oiio-dev-openimageio.org
>
>
>
> _______________________________________________
> Oiio-dev mailing list
> [email protected]
> http://lists.openimageio.org/listinfo.cgi/oiio-dev-openimageio.org
>
>
_______________________________________________
Oiio-dev mailing list
[email protected]
http://lists.openimageio.org/listinfo.cgi/oiio-dev-openimageio.org

Reply via email to