I've got an old OpenBSD 3.4 system which I'm replacing with a Soekris box.
Or, at least I will be once I figure out how to write to the CF card...
Upon inserting the card into my USB multi-card reader, I get the following
messages:
umass_scsi_cb: status cmd failed for scsi op 0x00
umass_scsi_cb: status cmd failed for scsi op 0x1e
umass_scsi_cb: status cmd failed for scsi op 0x25
sd1(umass0:1:0): Check Condition on opcode 0x25
SENSE KEY: Not Ready
COMMAND INFO: 11162946 (0xaa5542)
ASC/ASCQ: Medium Not Present
sd1(umass0:1:0): could not get size
So, OpenBSD can see the card, at sd1, but isn't getting everything. Any
attempt to use disklabel or newfs on it gives the following message:
disklabel: /dev/rsd1c: Device not configured
Any ideas on what I need to get past this?
Daniel T. Staal
---------------------------------------------------------------
This email copyright the author. Unless otherwise noted, you
are expressly allowed to retransmit, quote, or otherwise use
the contents for non-commercial purposes. This copyright will
expire 5 years after the author's death, or in 30 years,
whichever is longer, unless such a period is in excess of
local copyright law.
---------------------------------------------------------------
_______________________________________________
Openbsd-newbies mailing list
[email protected]
http://mailman.theapt.org/listinfo/openbsd-newbies
