On 12.10.2011 10:02, Eric Bénard wrote: > Hi, > > Le 12/10/2011 09:45, Martin Jansa a écrit : >> From: Simon Busch<morp...@gravedo.de> >> >> In most cases we don't need tslib in std. configuration as touchscreen >> access in most >> devices today is done with linux input interface. If some specific >> machine has a need for >> tslib support it should add the dependency in it's machine layer again >> and modify the >> profile script accordingly. >> > When using a resistive touchscreen, tslib is a common solution to handle > calibration and raw value processing : do you think this is a good thing > to remove this ?
Thats up to the environment you are using qt4-embedded in. In my case the setup is a little bit more complicated. We're using tslib but not directly in qt4-embedded (we can get rid of tslib completely but time is missing). I removed the dependency from qt4-embedded as qt4-embedded in oe-core should be the general thing used in all environments and therefore should be only a minimal setup with minimal dependencies. If someone needs tslib for qt4-embedded for his machine layer he should include tslib support in the machine layer itself. regards, Simon -- Simon Busch - http://mm.gravedo.de/blog/ _______________________________________________ Openembedded-core mailing list Openembedded-core@lists.openembedded.org http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-core