Thanks for your replya. I thought the the 'in use' and inability to create the volume were connected. After downgrading the parted I was able to create the physical partition followed by the volume.
That leaves me with a follow-up problem. Although I can create the volume group I can't then create a new volume as no groups show in the drop down list. pvdisplay shows: --- Physical volume --- PV Name /dev/sda4 VG Name data PV Size 58.09 GB / not usable 0 Allocatable yes PE Size (KByte) 32768 Total PE 1859 Free PE 1859 Allocated PE 0 PV UUID XX0cLQ-nwO3-jKWA-hl4D-QXQQ-Drti-E9gxNw vgdisplay shows: --- Volume group --- VG Name data System ID Format lvm2 Metadata Areas 1 Metadata Sequence No 1 VG Access read/write VG Status resizable MAX LV 0 Cur LV 0 Open LV 0 Max PV 0 Cur PV 1 Act PV 1 VG Size 58.09 GB PE Size 32.00 MB Total PE 1859 Alloc PE / Size 0 / 0 Free PE / Size 1859 / 58.09 GB VG UUID Ko16uQ-pvHC-LAwp-rwtC-4tSu-YKJc-t7hzLP lvdisplay shows: Volume group "storage" is exported which only contains an exported group. I'm somewhat lost here, is this another problem or something I'm doing. Regards Bill ----- "Rafiu Fakunle" <[EMAIL PROTECTED]> wrote: > Rafiu Fakunle wrote: > This looks like it's going to have to be the universal fix until OF > 2.3 > is out. > > I'm recooking the group now to make 1.6.22 the default parted. > > > R. _______________________________________________ Openfiler-users mailing list [email protected] https://lists.openfiler.com/mailman/listinfo/openfiler-users
