W dniu 2012-03-08 18:54, Mathias K. pisze: > i see some problems with the reset button (hardware reset) and openocd: > > > 1. connect the eval board > 2. connect openocd without a cpu init script > 3. press hardware reset button > 4. board resets and restart > > 5. telnet to openocd > 6. do a reset command > 7. board resets and restart > > 8. press hardware reset button > 9. board resets but stoped execution > > Whats wrong? Is this a issue with the stlink v2 or something related to > openocd?
I think that's because reset output of the debugger is in push-pull mode. 4\/3!! ------------------------------------------------------------------------------ Virtualization & Cloud Management Using Capacity Planning Cloud computing makes use of virtualization - but cloud computing also focuses on allowing computing to be delivered as a service. http://www.accelacomm.com/jaw/sfnl/114/51521223/ _______________________________________________ OpenOCD-devel mailing list OpenOCD-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/openocd-devel
