W dniu 2012-03-14 16:44, md5sum pisze: > No. After hw reset openosd tell follow: > "target state: halted > target halted due to debug-request, current mode: Thread > xPSR: 0x01000000 pc: 0x08001814 msp: 0x20005000" > > And I can't find command to disable it... > > Any idea?
"No" what? Not in push-pull mode? I see no reason for the commands above to indicate that reset is in open-drain mode... I didn't say that reset is constantly asserted, it's just held tightly at high level. But from what you show above it seems that this is something completely different from you described before. Maybe I don't understand you? Do you want your target to run after you push the reset button while OpenOCD is connected? 4\/3!! FCh ------------------------------------------------------------------------------ Virtualization & Cloud Management Using Capacity Planning Cloud computing makes use of virtualization - but cloud computing also focuses on allowing computing to be delivered as a service. http://www.accelacomm.com/jaw/sfnl/114/51521223/ _______________________________________________ OpenOCD-devel mailing list OpenOCD-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/openocd-devel
