Forget the question - I can see the changes coming in with Andreas's
various patches that will implement the capability I was asking about.
On Tue, Mar 20, 2012 at 6:32 PM, Paul Richards <paulr...@gmail.com> wrote:
> Hello,
>
> If I understand correctly, with the OpenOCD build linked with the FT2DXX
> drivers it's possible to specify the FTDI device port used for debugging by
> appropriate configuration using 'ft2232_device_desc' / 'ft2232_serial'
> commands (and presumably the FT2DXX driver's appendage of appropriate
> A/B/C/D suffix to each port's description). Is this also possible with the
> libftdi library?
>
> From what I can determine, libftdi does not report device descriptions
> with the equivalent suffixes, and the appropriate port must be set
> programmatically via 'ftdi_set_interface'. However, this capability seems
> to be restricted to the built in adapters based on FTDI and cannot be
> controlled via scripts.
>
> Cheers,
>
> Paul
>
>
------------------------------------------------------------------------------
This SF email is sponsosred by:
Try Windows Azure free for 90 days Click Here
http://p.sf.net/sfu/sfd2d-msazure
_______________________________________________
OpenOCD-devel mailing list
OpenOCD-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/openocd-devel
