On Mon, Apr 8, 2013 at 1:45 AM, Mindy Beseler <mindy.bese...@imgtec.com> wrote:
> I pulled the latest source from git (rather than use my 0.6.1 modified code
> source)
> and even with the libusb-1.0 directory under <openocd>\src
That will not help at all.
> the configure is using usblib-0.1. Is there some other directory needed or
> some
> other setup I need to do for configure to correctly pull in usblib-1.0?
>
> This is the configure command I'm using:
> ./configure --disable-werror --enable-ftdi --build=i686-pc-cygwin
> --host=i686-pc-mingw32
If your libusbx header and libraries are not in the default directory and
you are not using pkg-config, then you have to manually set the
following two flags to point the build system to libusbx.
CFLAGS C compiler flags
LDFLAGS linker flags, e.g. -L<lib dir> if you have libraries in a
nonstandard directory <lib dir>
--
Xiaofan
------------------------------------------------------------------------------
Minimize network downtime and maximize team effectiveness.
Reduce network management and security costs.Learn how to hire
the most talented Cisco Certified professionals. Visit the
Employer Resources Portal
http://www.cisco.com/web/learning/employer_resources/index.html
_______________________________________________
OpenOCD-devel mailing list
OpenOCD-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/openocd-devel
