On Wed, Jul 16, 2014 at 9:53 AM, Paul Fertser <[email protected]> wrote: > On Wed, Jul 16, 2014 at 08:08:31AM -0700, Andrey Smirnov wrote: >> On Wed, Jul 16, 2014 at 6:04 AM, Paul Fertser <[email protected]> wrote: >> > On Wed, Jul 16, 2014 at 05:45:29AM -0700, Andrey Smirnov wrote: > ... >> >> with Segger J-Link Lite and there were number of patches floating > ... >> It wasn't even getting to the point of talking to the HW, so that >> wouldn't really make a difference. It was failing at getting a >> response to the very first "get version" USB packet(USB reads were >> returning 0 bytes). I suspect it is some libusb on OSX related >> problem, but I need to look more into that. > > Hm, that'd be really strange because OpenOCD is using libusb >= 1.0.9 > (IIRC) happily on OS X with stlink, ftdi and the others. I wonder if > the device might got claimed by some OS X "kext" that needs to be > unloaded.
I agree, I used OS X to finish development of the F021 driver and the devkit I used for it comes with FTDI chip, so that worked fine for me. I need to fire up a Linux setup for this and see if I it a "nRF51/Segger combo problem" or "OS X problem". > > -- > Be free, use free (http://www.gnu.org/philosophy/free-sw.html) software! > mailto:[email protected] ------------------------------------------------------------------------------ Want fast and easy access to all the code in your enterprise? Index and search up to 200,000 lines of code with a free copy of Black Duck Code Sight - the same software that powers the world's largest code search on Ohloh, the Black Duck Open Hub! Try it now. http://p.sf.net/sfu/bds _______________________________________________ OpenOCD-devel mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/openocd-devel
