On Tue, Jan 13, 2015 at 3:30 PM, Jens Bauer <jens-li...@gpio.dk> wrote:
> > mdw 0x08000000
> Failed to read memory and, additionally, failed to find out where
> in procedure 'mdw'
>
> Back to the double-fault. This indicates that the code-snippet sent from
> OpenOCD HardFaults when it's trying to read Flash-memory.
>
By the way, OpenOCD doesn't execute any code to read flash, only to write
it. The CPU is not involved when reading, it's just regular bus accesses.
/Andreas
------------------------------------------------------------------------------
New Year. New Location. New Benefits. New Data Center in Ashburn, VA.
GigeNET is offering a free month of service with a new server in Ashburn.
Choose from 2 high performing configs, both with 100TB of bandwidth.
Higher redundancy.Lower latency.Increased capacity.Completely compliant.
http://p.sf.net/sfu/gigenet
_______________________________________________
OpenOCD-devel mailing list
OpenOCD-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/openocd-devel
