On 4.2.2015 17:02, Jens Bauer wrote: > Hi Tomas. > > On Wed, 04 Feb 2015 16:37:51 +0100, Tomas Vanek wrote: >> There is not much problem in setting FCLKDIV - I assume every KExx >> sets FEI mode @48MHz at reset (busclk 24MHz). > Uhm, yes, if we can be sure it's always set to the same speed, that could > simplify things. No. I was wrong again. 20, 40 or 48MHz. So look for a compatible clock mode, there may be any. 8MHz LIRC?? > >> KExx should have theirs own driver. > That means you think it would be better to make a 'stand-alone' kinetis_ke.c > than adding code to kinetis.c ? Well, as you said. Write a standalone first. Then we'll see. > >> If you write one, I volunteer to test a MKE06. > Great. I'll let you know if I succeed. ;) > > > Love > Jens > >
------------------------------------------------------------------------------ Dive into the World of Parallel Programming. The Go Parallel Website, sponsored by Intel and developed in partnership with Slashdot Media, is your hub for all things parallel software development, from weekly thought leadership blogs to news, videos, case studies, tutorials and more. Take a look and join the conversation now. http://goparallel.sourceforge.net/ _______________________________________________ OpenOCD-devel mailing list OpenOCD-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/openocd-devel
