- **status**: new --> closed
- **Comment**:
The ticket system is meant to track problems with OpenOCD, it's not a support
forum.
---
** [tickets:#214] Error: The specified debug interface was not found (ft2232)**
**Status:** closed
**Milestone:** 0.9.0
**Created:** Thu Dec 06, 2018 10:26 AM UTC by Dr. Peter Oehler
**Last Updated:** Fri Dec 07, 2018 02:57 PM UTC
**Owner:** nobody
Hello all.
I have a problem, running OpenOCD within Eclipse, similar to that reported here:
https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=751372
Is this bug not solved with the newer versions of OpenOCD?
That's the message at the console:
GNU MCU Eclipse 32-bit Open On-Chip Debugger 0.10.0+dev-00352-gaa6c7e9b
(2018-10-20-02:36)
Licensed under GNU GPL v2
For bug reports, read
http://openocd.org/doc/doxygen/bugs.html
Error: The specified debug interface was not found (ft2232)
The following debug interfaces are available:
1: parport
2: dummy
3: ftdi
4: usb_blaster
5: jtag_vpi
6: ft232r
7: amt_jtagaccel
8: gw16012
9: presto
10: usbprog
11: openjtag
12: jlink
13: vsllink
14: rlink
15: ulink
16: arm-jtag-ew
17: remote_bitbang
18: hla
19: osbdm
20: opendous
21: aice
22: cmsis-dap
23: kitprog
24: xds110
Thanks & best regards,
Peter
---
Sent from sourceforge.net because openocd-devel@lists.sourceforge.net is
subscribed to https://sourceforge.net/p/openocd/tickets/
To unsubscribe from further messages, a project admin can change settings at
https://sourceforge.net/p/openocd/admin/tickets/options. Or, if this is a
mailing list, you can unsubscribe from the mailing list._______________________________________________
OpenOCD-devel mailing list
OpenOCD-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/openocd-devel
