Apologies Paul bit just to wrap it up...
You don't have the correct driver installed.
You need to replace the windows default one with a suitable libusb/WinUsb one.
Zadig is a common way of doing that but if it doesn't work on vista (which is
obviously very old and arguably defunct) then you'll need to find another way.
I'd imagine that this is covered already somewhere.
Hope this helps.
---
** [tickets:#214] Error: The specified debug interface was not found (ft2232)**
**Status:** closed
**Milestone:** 0.9.0
**Created:** Thu Dec 06, 2018 10:26 AM UTC by Dr. Peter Oehler
**Last Updated:** Fri Dec 07, 2018 03:10 PM UTC
**Owner:** nobody
Hello all.
I have a problem, running OpenOCD within Eclipse, similar to that reported here:
https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=751372
Is this bug not solved with the newer versions of OpenOCD?
That's the message at the console:
GNU MCU Eclipse 32-bit Open On-Chip Debugger 0.10.0+dev-00352-gaa6c7e9b
(2018-10-20-02:36)
Licensed under GNU GPL v2
For bug reports, read
http://openocd.org/doc/doxygen/bugs.html
Error: The specified debug interface was not found (ft2232)
The following debug interfaces are available:
1: parport
2: dummy
3: ftdi
4: usb_blaster
5: jtag_vpi
6: ft232r
7: amt_jtagaccel
8: gw16012
9: presto
10: usbprog
11: openjtag
12: jlink
13: vsllink
14: rlink
15: ulink
16: arm-jtag-ew
17: remote_bitbang
18: hla
19: osbdm
20: opendous
21: aice
22: cmsis-dap
23: kitprog
24: xds110
Thanks & best regards,
Peter
---
Sent from sourceforge.net because openocd-devel@lists.sourceforge.net is
subscribed to https://sourceforge.net/p/openocd/tickets/
To unsubscribe from further messages, a project admin can change settings at
https://sourceforge.net/p/openocd/admin/tickets/options. Or, if this is a
mailing list, you can unsubscribe from the mailing list._______________________________________________
OpenOCD-devel mailing list
OpenOCD-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/openocd-devel
