Hi Tommy Murphy, Thanks for your reply. It seems like there is a national issue with the internet in Belgium (especially Flanders) right now. Lots of Belgians complain about outages today.
I'll try again tonight or tomorrow. Kind regards, Kristof Van: "Tommy Murphy" <tommy_mur...@hotmail.com> Aan: "kristof mulier" <kristof.mul...@telenet.be> Cc: "Liviu Ionescu" <i...@livius.net>, "johan" <jo...@embeetle.com>, "matic" <ma...@embeetle.com>, "openocd-devel" <openocd-devel@lists.sourceforge.net> Verzonden: Zondag 30 augustus 2020 14:38:38 Onderwerp: Re: [OpenOCD-devel] Missing libusb shared object file in xPack build. "Repo outages" not "drop outages". From: Tommy Murphy <tommy_mur...@hotmail.com> Sent: Sunday, August 30, 2020 1:36:33 PM To: kristof.mul...@telenet.be <kristof.mul...@telenet.be> Cc: Liviu Ionescu <i...@livius.net>; johan <jo...@embeetle.com>; matic <ma...@embeetle.com>; openocd-devel <openocd-devel@lists.sourceforge.net> Subject: Re: [OpenOCD-devel] Missing libusb shared object file in xPack build. I did a build last night and another this morning (after doing sudo rm -rf ~/Work to clean all downloads off) with the openocd repo (i.e. those last three lines of def-source.sh uncommented) and both went fine. Sometimes network issues and drop outages can cause build failures but very rarely in my experience. Note that all of the steps that I carried out are all itemized in Liviu's instructions. From: kristof.mul...@telenet.be <kristof.mul...@telenet.be> Sent: Sunday, August 30, 2020 11:09:37 AM To: Tommy Murphy <tommy_mur...@hotmail.com> Cc: Liviu Ionescu <i...@livius.net>; johan <jo...@embeetle.com>; matic <ma...@embeetle.com>; openocd-devel <openocd-devel@lists.sourceforge.net> Subject: Re: [OpenOCD-devel] Missing libusb shared object file in xPack build. Hi @Tommy Murphy, Thank you very much for sharing the precise commands you enter to build OpenOCD :-) I've tried this morning, but got the following problem: Downloading "libusb-win32-src-1.2.6.0.zip" from "http://sourceforge.net/projects/libusb-win32/files/libusb-win32-releases/1.2.6.0/libusb-win32-src-1.2.6.0.zip"; ... % Total % Received % Xferd Average Speed Time Time Time Current Dload Upload Total Spent Left Speed 100 178 100 178 0 0 52 0 0:00:03 0:00:03 --:--:-- 52 100 434 100 434 0 0 105 0 0:00:04 0:00:04 --:--:-- 1272 100 421 100 421 0 0 97 0 0:00:04 0:00:04 --:--:-- 97 100 503 100 503 0 0 112 0 0:00:04 0:00:04 --:--:-- 112 100 417 100 417 0 0 80 0 0:00:05 0:00:05 --:--:-- 814 0 0 0 0 0 0 0 0 --:--:-- 0:02:14 --:--:-- 0 curl: (7) Failed to connect to netcologne.dl.sourceforge.net port 443: Connection timed out It seems like the libusb sourceforge page is down? I'll try again this afternoon. Kind regards, Kristof Mulier Van: "Tommy Murphy" <tommy_mur...@hotmail.com> Aan: "Liviu Ionescu" <i...@livius.net>, "kristof mulier" <kristof.mul...@telenet.be> Cc: "johan" <jo...@embeetle.com>, "matic" <ma...@embeetle.com>, "openocd-devel" <openocd-devel@lists.sourceforge.net> Verzonden: Zaterdag 29 augustus 2020 21:36:25 Onderwerp: Re: [OpenOCD-devel] Missing libusb shared object file in xPack build. Liviu's scripts build his snapshot sources. If you want to build from the openocd repo then uncomment the three lines here: [ https://github.com/xpack-dev-tools/openocd-xpack/blob/xpack/scripts/defs-source.sh#L41 | https://github.com/xpack-dev-tools/openocd-xpack/blob/xpack/scripts/defs-source.sh#L41 ] FWIW here are all of the commands that I run (all itemised in Liviu's instructions) to do a "default" build using his scripts on a clean VM installation of Ubuntu 18.04: https://xpack.github.io/xbb/prerequisites/ sudo apt-get install -y apt-transport-https ca-certificates curl software-properties-common curl -fsSL https://download.docker.com/linux/ubuntu/gpg | sudo apt-key add - version_name=$(lsb_release -cs) sudo add-apt-repository "deb [arch=amd64] https://download.docker.com/linux/ubuntu ${version_name} stable" sudo apt-get update sudo apt-get -y install docker-ce sudo docker run hello-world sudo groupadd docker sudo gpasswd -a ${USER} docker sudo service docker restart shutdown -r now docker run hello-world rm -rf ~/Downloads/openocd-xpack.git git clone --recurse-submodules https://github.com/xpack-dev-tools/openocd-xpack.git ~/Downloads/openocd-xpack.git bash ~/Downloads/openocd-xpack.git/scripts/build.sh --all From: Liviu Ionescu <i...@livius.net> Sent: Saturday 29 August 2020 19:21 To: kristof.mul...@telenet.be <kristof.mul...@telenet.be> Cc: Tommy Murphy <tommy_mur...@hotmail.com>; johan <jo...@embeetle.com>; matic <ma...@embeetle.com>; openocd-devel <openocd-devel@lists.sourceforge.net> Subject: Re: [OpenOCD-devel] Missing libusb shared object file in xPack build. > On 29 Aug 2020, at 21:18, kristof.mul...@telenet.be wrote: > > ... I got it running properly told you so! > So what would change in these commands to achieve that? ... defs-source.sh' > file (uncommenting the last three lines)? Or is it something else? Keine Ahnung, I never used the scripts with different repos. those three lines were added by Tommy. Liviu
_______________________________________________ OpenOCD-devel mailing list OpenOCD-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/openocd-devel
