---
**[tickets:#456] aducm360 swd could not find MEM-AP**
**Status:** new
**Milestone:** 0.10.0
**Labels:** aducm360_swd
**Created:** Tue Jul 01, 2025 01:58 PM UTC by Den
**Last Updated:** Tue Jul 01, 2025 01:58 PM UTC
**Owner:** nobody
**Attachments:**
-
[attach.zip](https://sourceforge.net/p/openocd/tickets/456/attachment/attach.zip)
(751.5 kB; application/x-zip-compressed)
aducm360 not connect to openocd via jtag-swd.
adapter based on ftdi2232
used original config aducm360.cfg
used my config ftdi_swd.cfg
tested in openocd v10 & v12
command:
openocd.exe -d0 -f \interface\ftdi\ftdi_swd.cfg -f target\aducm360.cfg -c init
-c targets -c "reset halt" -c "flash erase 0" -c shutdown
log:
debug_level: 0
cortex_m reset_config vectreset
Error: [aducm360.cpu] Could not find MEM-AP to control the core
TargetName Type Endian TapName State
-- ------------------ ---------- ------ ------------------ ------------
0* aducm360.cpu cortex_m little aducm360.cpu unknown
Error: [aducm360.cpu] Could not find MEM-AP to control the core
Error: [aducm360.cpu] Debug AP not available, reset NOT asserted!
in attach log from debug level 3
ftdi_swd.cfg
log saleae logic 1.2.18
---
Sent from sourceforge.net because openocd-devel@lists.sourceforge.net is
subscribed to https://sourceforge.net/p/openocd/tickets/
To unsubscribe from further messages, a project admin can change settings at
https://sourceforge.net/p/openocd/admin/tickets/options. Or, if this is a
mailing list, you can unsubscribe from the mailing list.