> Can anyone verify that this interface is still functional in > 0.4 ? Out of 0.4-rc1, 0.3.1 and an old rev.131 fetch only the > old rev.131 fetch works to a certain extent. In all cases the > openocd was built from source on cygwin with only > amt_jtagaccell and parport_give_io enabled in configure.
There appears to be a certain amount of rot in the amt_jtagaccel driver, there was no implementation of .khz in the interface table, adding that allows the speed to be set. There are still problems with clocking from the JTAG though as the CPU id comms back corrupt. - Matthew ********************************************************************** Serck Controls Ltd, Rowley Drive, Coventry, CV3 4FH, UK A company registered in England Reg. No. 4353634 Tel: +44 (0) 24 7630 5050 Fax: +44 (0) 24 7630 2437 Web: www.serck-controls.com Admin: p...@serck-controls.co.uk A subsidiary of Serck Controls Pty. Ltd. ********************************************************************** This email and files transmitted with it are confidential and intended solely for the use of the individual or entity to whom they are addressed. If you have received this email in error please notify the above. Any views or opinions presented are those of the author and do not necessarily represent those of Serck Controls Ltd. This message has been scanned for malware by Mailcontrol. www.Mailcontrol.com _______________________________________________ Openocd-development mailing list Openocd-development@lists.berlios.de https://lists.berlios.de/mailman/listinfo/openocd-development
