On Wed, May 4, 2011 at 7:51 PM, Jean-Christophe PLAGNIOL-VILLARD <plagn...@jcrosoft.com> wrote: > On 04:17 Wed 04 May , Ųyvind Harboe wrote: >> > why do you want to set one the adapter is in auto adaptive mode by default >> > no need to set any speed >> >> OpenOCD doesn't have an auto-adaptive mode, so I guess you need >> to explain what you are referring to. > > on J-Link > > if you set the speed to 0xffff > then the adapter will automaticly adaptive clocking
Are you talking about RCLK? Sounds like the RCLK support in jlink adapter does not report back properly to OpenOCD. OpenOCD uses "0" to ->speed() to mean RCLK. If jlink has some other magic value, then the jlink driver needs to do the translation. -- Øyvind Harboe Can Zylin Consulting help on your project? US toll free 1-866-980-3434 / International +47 51 87 40 27 http://www.zylin.com/zy1000.html ARM7 ARM9 ARM11 XScale Cortex JTAG debugger and flash programmer _______________________________________________ Openocd-development mailing list Openocd-development@lists.berlios.de https://lists.berlios.de/mailman/listinfo/openocd-development
