Hi Tony, Normally you should not need to check if IMMND is in sync at standby, because the IMMND must be in sync before the AMFD is in sync at an SC. This even if you are doing failovers back and forth between the SCs.
So in this case you must have had some additional problem causing the already synced IMMND at the standby to crash. This should be visible in the syslogs if you look at log messages from the process type osafimmnd. Even if it crashes on a segv, it should be visible that the osafimmnd process is being restarted. If osafimmnd crashes spontaneously, i.e. not as a result of an induced shutdown or explicit kill of that process then you should report that, so we can create a defect ticket to fix the problem. It could possibly be a problem that is already fixed, if you are using an old branch or at least not the latest changeset on 4.5 or 4.6. Thanks Anders Bjornerstedt On 07/07/2015 01:43 PM, Tony Hart wrote: > Hi Zoran, > > Is there a log message I can search for to see if immnd was synced? > > thanks > — > tony > > On Jul 7, 2015, at 7:10 AM, Zoran Milinkovic > <[email protected]<mailto:[email protected]>> wrote: > > Hi Tony, > > In syslogs you have: > 2015-07-03T19:49:24.544851+00:00 scm1 osafimmd[3533]: ER Failed to find > candidate for new IMMND coordinator > > This means that IMMND data on standby controller is not synced, or IMMND > crashed/exited. It can cause exiting IMMD and rebooting the node. > The new coordinator must be fully synced IMMND and it must be on one of > controllers. > Since, you have pulled out the active controller, and data was not synced on > standby controller, you have an exit of the remaining IMMD, which causes node > reboot. > > It would be good if you check the state of IMMND on standby controller, and > check if the data was synced or not before you pulled out the active > controller. > > BR, > Zoran > > -----Original Message----- > From: Nagendra Kumar [mailto:[email protected]] > Sent: Tuesday, July 07, 2015 12:45 PM > To: Tony Hart > Cc: > [email protected]<mailto:[email protected]> > Subject: Re: [users] FAILOVER StandBy --> Active FAILED, stdby not in good > state > > Hi Tony, > > There are few checks including 'Cold Sync', state of node > joining the cluster, etc. So, in your case, Cold sync has been completed and > that check might have passed, but node is yet to become operationally > functional. So, if the node is declared as ENABLED, then failover should be > fine. > > Sometimes, it happens in reverse: Node joins, but Cold sync is not completed. > But this situation can be avoided if take fix for #1334. > > > > Thanks > > -Nagu > > > > From: Tony Hart [mailto:[email protected]] > Sent: 07 July 2015 15:58 > To: Nagendra Kumar > Cc: > [email protected]<mailto:[email protected]> > Subject: Re: [users] FAILOVER StandBy --> Active FAILED, stdby not in good > state > > > > Hi Nagu, > > > > Thanks for the pointer. Are you saying in my case that cold sync had not > completed, even though the log message said it had? > > > > > > On Jul 7, 2015, at 6:12 AM, Nagendra Kumar <HYPERLINK > "mailto:[email protected]"[email protected]<mailto:[email protected]>> > wrote: > > > > > > > ------------------------------------------------------------------------------ > Don't Limit Your Business. Reach for the Cloud. > GigeNET's Cloud Solutions provide you with the tools and support that you > need to offload your IT needs and focus on growing your business. > Configured For All Businesses. Start Your Cloud Today. > https://www.gigenetcloud.com/ > _______________________________________________ > Opensaf-users mailing list > [email protected]<mailto:[email protected]> > https://lists.sourceforge.net/lists/listinfo/opensaf-users > > ------------------------------------------------------------------------------ > Don't Limit Your Business. Reach for the Cloud. > GigeNET's Cloud Solutions provide you with the tools and support that > you need to offload your IT needs and focus on growing your business. > Configured For All Businesses. Start Your Cloud Today. > https://www.gigenetcloud.com/ > _______________________________________________ > Opensaf-users mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/opensaf-users ------------------------------------------------------------------------------ Don't Limit Your Business. Reach for the Cloud. GigeNET's Cloud Solutions provide you with the tools and support that you need to offload your IT needs and focus on growing your business. Configured For All Businesses. Start Your Cloud Today. https://www.gigenetcloud.com/ _______________________________________________ Opensaf-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/opensaf-users
