Eddy Nigg (StartCom Ltd.) wrote: > Hi Jan, > > Jan Just Keijser wrote: >> that's a very interesting patch ! >> I've been trying to get a similar eToken PRO (32K) to work and ended up >> using the Aladdin RTE software. My eToken PRO also lists '4.2B' but the >> problem lies/lied with the OS version >> OS Version: 200.9 (unknown Version) >> > Just for the record, the patch was provided to me by Nils... >> with your patch the 'opensc-tool' and 'opensc-explorer' commands are >> finally working *BUT* I still cannot see any certificates that I have >> stored on the card (using the Windows Aladdin RTE 3.65 software).
> They are not compatible with OpenSC pkcs15. You can however use both of > them side to side, but you'll never "see" each others certificate. Sounds like a emulation routine could be writen. Has anyone looked at that? I would assume you would want to use the same certificates as used with Windows and the vendor's other software. But > concerning your error below, perhaps you must initialize the token first > with "pkcs15-init -C"? Is this what you did? > >> Also, >> pkcs11-tool still gives me errors: >> >> ./pkcs11-tool -L >> [opensc-pkcs11] card-cardos.c:262:cardos_check_sw: file not found >> [opensc-pkcs11] iso7816.c:459:iso7816_select_file: returning with: File >> not found >> [opensc-pkcs11] card-cardos.c:438:cardos_select_file: returning with: >> File not found >> [opensc-pkcs11] card.c:554:sc_select_file: returning with: File not found >> [opensc-pkcs11] pkcs15-postecert.c:337:sc_pkcs15emu_postecert_init: >> Failed to initialize Postecert and Cnipa emulation: Unsupported card >> [opensc-pkcs11] card-cardos.c:262:cardos_check_sw: file not found >> [opensc-pkcs11] iso7816.c:459:iso7816_select_file: returning with: File >> not found >> [opensc-pkcs11] card-cardos.c:438:cardos_select_file: returning with: >> File not found >> [opensc-pkcs11] card.c:554:sc_select_file: returning with: File not found >> [opensc-pkcs11] card-cardos.c:262:cardos_check_sw: file not found >> [opensc-pkcs11] iso7816.c:464:iso7816_select_file: returning with: File >> not found >> [opensc-pkcs11] card-cardos.c:438:cardos_select_file: returning with: >> File not found >> [opensc-pkcs11] card.c:554:sc_select_file: returning with: File not found >> [opensc-pkcs11] pkcs15.c:755:sc_pkcs15_bind: returning with: Unsupported >> card >> Available slots: >> Slot 0 (empty) >> Slot 1 (empty) >> Slot 2 (empty) >> Slot 3 (empty) >> Slot 4 (empty) >> Slot 5 (empty) >> Slot 6 (empty) >> Slot 7 (empty) >> >> any ideas ? >> >> Jan Just Keijser >> System Integrator >> Nikhef / Amsterdam >> > > -- > Regards > > Signer: Eddy Nigg, StartCom Ltd. > Jabber: [EMAIL PROTECTED] > Phone: +1.213.341.0390 > > > ------------------------------------------------------------------------ > > _______________________________________________ > opensc-devel mailing list > opensc-devel@lists.opensc-project.org > http://www.opensc-project.org/mailman/listinfo/opensc-devel -- Douglas E. Engert <[EMAIL PROTECTED]> Argonne National Laboratory 9700 South Cass Avenue Argonne, Illinois 60439 (630) 252-5444 _______________________________________________ opensc-devel mailing list opensc-devel@lists.opensc-project.org http://www.opensc-project.org/mailman/listinfo/opensc-devel
