You first need to set the interface instance with the ndd command. ndd -set /dev/ce instance 0 - for ce0 ndd -set /dev/ce instance 1 - for ce1
Once you do that you can use ndd to set the setting that you want on the specified interface. Nick On 9/2/07, xavier <[EMAIL PROTECTED]> wrote: > > I am running Solaris with two NICs in the box ce0 ce1. Is there any way to > get full duplex 1000 > > FYI > > > bash-2.05# netstat -k ce0 | egrep 'link_speed|link_status|link_duplex' > lp_cap_asmpause 1 lp_cap_pause 0 link_T4 0 link_speed 1000 > link_duplex 2 link_asmpause 0 link_pause 0 link_up 1 mac_mtu 1522 > > bash-2.05# netstat -k ce1 | egrep 'link_speed|link_status|link_duplex' > lp_cap_asmpause 0 lp_cap_pause 0 link_T4 0 link_speed 10 > link_duplex 1 link_asmpause 0 link_pause 0 link_up 1 mac_mtu 1522 > > See in ce1 link speed is 10 mpbs its should be same as that ce0 , please > help me , > > when i tried to set > > # ndd -set /dev/ce instance 1 > # ndd -set /dev/ce adv_1000fdx_cap 1 > # ndd -set /dev/ce adv_autoneg_cap 1 > > ndd -set /dev/ce1 adv_1000fdx_cap 1 > open of /dev/ce1 failed: No such file or directory > > after added the command ce1 still shows same 10x only > > Aug 31 16:52:23 eqoas322 genunix: [ID 611667 kern.info] NOTICE: ce1: xcvr > addr:0x01 - link up 10 Mbps half duplex > Aug 31 17:04:58 eqoas322 genunix: [ID 611667 kern.info] NOTICE: ce1: xcvr > addr:0x01 - link up 10 Mbps half duplex > > CHARLES > > > This message posted from opensolaris.org > _______________________________________________ > opensolaris-discuss mailing list > opensolaris-discuss@opensolaris.org >
_______________________________________________ opensolaris-discuss mailing list opensolaris-discuss@opensolaris.org