Hi ,
According to your printout you got this thing:
value='pci8086,1064.1028.181.3' + 'pci8086,1064.1028.181' + 'pci1028,181' +
'pci8086,1064.3' + 'pci8086,1064' + 'pciclass,020000' + 'pciclass,0
200'
name='model' type=string items=1
value='Ethernet controller'
According to http://www.pcidatabase.com/
This is:
http://www.pcidatabase.com/search.php?device_search_str=1064&device_search=Search
0x1064 82562EZ PLC 0x8086 Alex
which is:
http://www.intel.com/design/network/products/lan/controllers/82562.htm
Which has been reported to work in the Solaris HCL:
http://www.sun.com/bigadmin/hcl/data/components/details/2717.html
only you need to modify the install instructions to :
[1] Execute the following command:
# update_drv -a -i '"pci8086,1064"' iprb;
[2] Reboot
[3] You should now be able do either configure the " iprb0 " interface
manually with:
# ifconfig iprb0 plumb 192.168.1.2 netmask 255.255.255.0 up
Just to make sure its functional .
If so , I then recommend that you run a :
# sys-unconfig
which will reboot the system again, and that you then answer all the identity
and networking questions that is part of the reconfiguration questions.
This message posted from opensolaris.org
