On Mon, Sep 18, 2000 at 05:03:24PM +0200, Richard Levitte - VMS Whacker wrote:
> Lutz.Jaenicke> Provided the "-ldld" change is applied to "Configure",
> Lutz.Jaenicke> I have success for HP-UX 10.20 (which is only 32 bits)
> Lutz.Jaenicke> for the appended configurations (gcc is 2.95.2).
>
> Cool. I've changed -ldl to -ldld on all hpux targets where I made
> that typo.
As far as I understood the snippet of the documentation posted earlier, it
won't hurt.
> Lutz.Jaenicke> With respect to the "-ldld" <-> "-ldl" issue:
> Lutz.Jaenicke> -ldl is only suitable for 64bit targets, so I would
> Lutz.Jaenicke> recommend using it for the "64"-configurations. At
> Lutz.Jaenicke> 64bits it is and must be availble, so it should be
> Lutz.Jaenicke> used. Other configurations must use -ldld.
>
> So basically, in all hpux targets that have "64" in the name, right?
Yes, that is my conclusion. I only have 10.20, though.
> Lutz.Jaenicke> With respect to the large number of hpux-targets, I
> Lutz.Jaenicke> really think some cleaning could be done :-)
>
> Definitely. I can't however, I do not know HP-UX well enough... Or
> rather, I can guess a lot :-).
I should be able to do it after one decade of HP-UX :-)
> Lutz.Jaenicke> Before I can recommend some cleanup, I have one more
> Lutz.Jaenicke> question: some targets (e.g. hpux-parisc-cc) have the
> Lutz.Jaenicke> -D_REENTRANT defined in Configure, even though it
> Lutz.Jaenicke> should/must be used as an additional argument to
> Lutz.Jaenicke> Configure. What shall happen to this definition???
>
> You you give -D_REENTRANT to Configure, you may get it twice...
> You're thinking about the comment in Configure, right? It's just that
> before the change I made yesterday, no hpux target (that I saw) had
> -D_REENTRANT... In other words, the comment should be changed.
./config will use "-D_REENTRANT" for HP-UX 10 and 11, not for 9.x
So probably we should differentiate between 9.x (which has its own
targets anyway without -D_REENTRANT) and the 10/11.x targets which will
get the -D_REENTRANT fix inside Configure and ./config will leave it
alone in the future!?
Best regards,
Lutz
--
Lutz Jaenicke [EMAIL PROTECTED]
BTU Cottbus http://www.aet.TU-Cottbus.DE/personen/jaenicke/
Lehrstuhl Allgemeine Elektrotechnik Tel. +49 355 69-4129
Universitaetsplatz 3-4, D-03044 Cottbus Fax. +49 355 69-4153
______________________________________________________________________
OpenSSL Project http://www.openssl.org
Development Mailing List [EMAIL PROTECTED]
Automated List Manager [EMAIL PROTECTED]
