From: Richard Levitte <rich...@levitte.org>
> I'll have a look at the no-copy variant you had a long time ago.
Not quickly enough, apparently.
From: open...@master.openssl.org (OpenSSL)
> OpenSSL version 0.9.8m released
Not entirely satisfactory on VMS. (Believe it or not.)
Test problem
------------
Symptom:
[...]
Generate and certify a test certificate via the 'ca' program
%DCL-W-INSFPRM, missing command parameters - supply all required parameters
%DCL-W-INSFPRM, missing command parameters - supply all required parameters
Generating a 1024 bit RSA private key
[...]
Possible fix:
--- apps/CA.com_orig 2000-02-11 12:12:47 -0600
+++ apps/CA.com 2010-02-25 15:01:54 -0600
@@ -114,8 +114,8 @@
$ IF F$SEARCH(CATOP+".private"+CAKEY) .EQS. ""
$ THEN
$ READ '__INPUT' FILE -
- /PROMT="CA certificate filename (or enter to create)"
-$ IF F$SEARCH(FILE) .NES. ""
+ /PROMPT="CA certificate filename (or enter to create)"
+$ IF (FILE .NES. "") .AND. (F$SEARCH(FILE) .NES. "")
$ THEN
$ COPY 'FILE' 'CATOP'.private'CAKEY'
$ RET=$STATUS
One might think that the (FILE .NES. "") test would be redundant, but
some clever fellow did this:
[...]
$ ! The following is to make sure access() doesn't get confused. It
$ ! really needs one file in the directory to give correct answers...
$ COPY NLA0: 'CATOP'.certs].;
$ COPY NLA0: 'CATOP'.crl].;
$ COPY NLA0: 'CATOP'.newcerts].;
$ COPY NLA0: 'CATOP'.private].;
[...]
I don't know what that actually buys us, but it does give f$search( "")
something to find for a null file spec. (At least I think that that's
the stuff which causes this symptom. Whoever does it, the changes shown
below should fix it.) For example:
alp $ write sys$output f$search( "") ! What I'd expect, too ...
alp $ copy nl: . ! But, apparently,
alp $ write sys$output f$search( "") ! it's not the only possibility ...
ALP$DKA0:[SMS].;1
So, when FILE is "" (which is what happens in real life), that
COPY 'FILE' 'CATOP'.private'CAKEY'
operation fails, because DCL sees only the second parameter. With
SET VERIFY, it looks like this:
$ IF F$SEARCH(FILE) .NES. ""
$ THEN
$ COPY
ALP$DKA100:[UTILITY.SOURCE.OPENSSL.OPENSSL-0^.9^.8M.TEST.DEMOCA.private]CAKEY.PEM
%DCL-W-INSFPRM, missing command parameters - supply all required parameters
Note the two spaces after "COPY" (where 'FILE' is "", between them).
Changes to stop makevms.com from copying C source files into [.test]:
--- makevms.com_orig 2009-11-12 10:59:18 -0600
+++ makevms.com 2010-02-25 12:35:09 -0600
@@ -424,26 +424,6 @@
$!
$ COPY SYS$DISK:[.CRYPTO.RIPEMD]RMD160.C SYS$DISK:[.APPS]
$!
-$! Tell The User We Are Partly Rebuilding The [.TEST] Directory.
-$!
-$ WRITE SYS$OUTPUT "Rebuilding The '[.TEST]*.C' Files."
-$!
-$! First, We Have To "Rebuild" The "[.TEST]" Directory, So Delete
-$! All The "C" Files That Are Currently There Now.
-$!
-$ DELETE SYS$DISK:[.TEST]*.C;*
-$ DELETE SYS$DISK:[.TEST]EVPTESTS.TXT;*
-$!
-$! Copy all the *TEST.C files from [.CRYPTO...] into [.TEST]
-$!
-$ COPY SYS$DISK:[.CRYPTO.*]%*TEST.C SYS$DISK:[.TEST]
-$ COPY SYS$DISK:[.CRYPTO.SHA]SHA%%%T.C SYS$DISK:[.TEST]
-$ COPY SYS$DISK:[.CRYPTO.EVP]EVPTESTS.TXT SYS$DISK:[.TEST]
-$!
-$! Copy all the *TEST.C files from [.SSL...] into [.TEST]
-$!
-$ COPY SYS$DISK:[.SSL]%*TEST.C SYS$DISK:[.TEST]
-$!
$! Tell The User We Are Rebuilding The [.INCLUDE.OPENSSL] Directory.
$!
$ WRITE SYS$OUTPUT "Rebuilding The '[.INCLUDE.OPENSSL]' Directory."
Changes to let test/maketests.com use C source files where they lie.
(Should resemble my suggestions for 0.9.8l.)
--- test/maketests.com_orig 2009-08-25 02:17:11 -0500
+++ test/maketests.com 2010-02-25 12:41:33 -0600
@@ -42,34 +42,20 @@
$!
$ TCPIP_LIB = ""
$!
-$! Check What Architecture We Are Using.
+$! Check Which Architecture We Are Using.
$!
-$ IF (F$GETSYI("CPU").LT.128)
-$ THEN
-$!
-$! The Architecture Is VAX.
-$!
-$ ARCH := VAX
-$!
-$! Else...
-$!
-$ ELSE
-$!
-$! The Architecture Is Alpha, IA64 or whatever comes in the future.
+$ if (f$getsyi( "HW_MODEL") .lt. 1024)
+$ then
+$ arch = "VAX"
+$ else
+$ arch = ""
+$ arch = arch+ f$edit( f$getsyi( "ARCH_NAME"), "UPCASE")
+$ if (arch .eqs. "") then arch = "UNK"
+$ endif
$!
-$ ARCH = F$EDIT( F$GETSYI( "ARCH_NAME"), "UPCASE")
-$ IF (ARCH .EQS. "") THEN ARCH = "UNK"
-$!
-$! End The Architecture Check.
-$!
-$ ENDIF
-$!
-$! Define The OBJ Directory.
+$! Define The OBJ and EXE Directories (EXE before CHECK_OPTIONS).
$!
$ OBJ_DIR := SYS$DISK:[-.'ARCH'.OBJ.TEST]
-$!
-$! Define The EXE Directory.
-$!
$ EXE_DIR := SYS$DISK:[-.'ARCH'.EXE.TEST]
$!
$! Check To Make Sure We Have Valid Command Line Parameters.
@@ -82,7 +68,7 @@
$!
$! Tell The User What Kind of Machine We Run On.
$!
-$ WRITE SYS$OUTPUT "Compiling On A ",ARCH," Machine."
+$ WRITE SYS$OUTPUT "Compiling On ''ARCH'."
$!
$! Define The CRYPTO-LIB We Are To Use.
$!
@@ -92,169 +78,224 @@
$!
$ SSL_LIB := SYS$DISK:[-.'ARCH'.EXE.SSL]LIBSSL.OLB
$!
-$! Check To See If The Architecture Specific OBJ Directory Exists.
+$! Create the OBJ and EXE Directories, if needed.
$!
-$ IF (F$PARSE(OBJ_DIR).EQS."")
-$ THEN
+$ IF (F$PARSE(OBJ_DIR).EQS."") THEN -
+ CREATE /DIRECTORY 'OBJ_DIR'
+$ IF (F$PARSE(EXE_DIR).EQS."") THEN -
+ CREATE /DIRECTORY 'EXE_DIR'
$!
-$! The EXE Directory Dosen't Exist, So Create It.
-$!
-$ CREATE/DIRECTORY 'OBJ_DIR'
+$! Check To See If We Have The Proper Libraries.
$!
-$! End The Architecture Specific OBJ Directory Check.
+$ GOSUB LIB_CHECK
$!
-$ ENDIF
+$! Check To See If We Have A Linker Option File.
$!
-$! Check To See If The Architecture Specific EXE Directory Exists.
+$ GOSUB CHECK_OPT_FILE
$!
-$ IF (F$PARSE(EXE_DIR).EQS."")
-$ THEN
+$! Define The TEST Files.
$!
-$! The EXE Directory Dosen't Exist, So Create It.
+T_D_1 = "[-.crypto.bf]"
+T_F_1 = "bftest"
+T_D_2 = "[-.crypto.bn]
+T_F_2 = "bntest,exptest" ! "divtest"
+T_D_3 = "[-.crypto.cast]"
+T_F_3 = "casttest"
+T_D_4 = "[-.crypto.conf]"
+T_F_4 = "" ! "test"
+T_D_5 = "[-.crypto.des]"
+T_F_5 = "destest"
+T_D_6 = "[-.crypto.dh]"
+T_F_6 = "dhtest"
+T_D_7 = "[-.crypto.dsa]"
+T_F_7 = "dsatest"
+T_D_8 = "[-.crypto.ec]"
+T_F_8 = "ectest"
+T_D_9 = "[-.crypto.ecdh]"
+T_F_9 = "ecdhtest"
+T_D_10 = "[-.crypto.ecdsa]"
+T_F_10 = "ecdsatest"
+T_D_11 = "[-.crypto.engine]"
+T_F_11 = "enginetest"
+T_D_12 = "[-.crypto.evp]"
+T_F_12 = "evp_test"
+T_D_13 = "[-.crypto.hmac]"
+T_F_13 = "hmactest"
+T_D_14 = "[-.crypto.idea]"
+T_F_14 = "ideatest"
+T_D_15 = "[-.crypto.jpake]"
+T_F_15 = "jpaketest"
+T_D_16 = "[-.crypto.lhash]"
+T_F_16 = "" ! "lh_test"
+T_D_17 = "[-.crypto.md2]"
+T_F_17 = "md2test"
+T_D_18 = "[-.crypto.md4]"
+T_F_18 = "md4test"
+T_D_19 = "[-.crypto.md5]"
+T_F_19 = "md5test"
+T_D_20 = "[-.crypto.mdc2]"
+T_F_20 = "mdc2test"
+T_D_21 = "[-.crypto.pqueue]"
+T_F_21 = "" ! "pq_test"
+T_D_22 = "[-.crypto.rand]"
+T_F_22 = "randtest"
+T_D_23 = "[-.crypto.rc2]"
+T_F_23 = "rc2test"
+T_D_24 = "[-.crypto.rc4]"
+T_F_24 = "rc4test"
+T_D_25 = "[-.crypto.rc5]"
+T_F_25 = "rc5test"
+T_D_26 = "[-.crypto.ripemd]"
+T_F_26 = "rmdtest"
+T_D_27 = "[-.crypto.rsa]"
+T_F_27 = "rsa_test"
+T_D_28 = "[-.crypto.sha]
+T_F_28 = "sha1test,sha256t,sha512t,shatest"
+T_D_29 = "[-.crypto.threads]
+T_F_29 = "" !"mttest"
+T_D_30 = "[-.crypto.x509v3]
+T_F_30 = "" ! "tabtest"
+T_D_31 = "[-.ssl]"
+T_F_31 = "ssltest"
+T_D_32 = "[-.test]"
+T_F_32 = "igetest"
$!
-$ CREATE/DIRECTORY 'EXE_DIR'
+$ TCPIP_PROGRAMS = ",,"
+$ IF COMPILER .EQS. "VAXC" THEN -
+ TCPIP_PROGRAMS = ",SSLTEST,"
$!
-$! End The Architecture Specific EXE Directory Check.
+$! Define and initialize Test Directory Counter.
$!
-$ ENDIF
+$ T_D_N = 0
$!
-$! Check To See If We Have The Proper Libraries.
+$! Increment directory counter. Exit the directory loop, if done.
$!
-$ GOSUB LIB_CHECK
+$ NEXT_DIR:
$!
-$! Check To See If We Have A Linker Option File.
+$ T_D_N = T_D_N+ 1
+$ IF (F$TYPE( T_D_'T_D_N') .EQS. "") THEN GOTO DIR_DONE
$!
-$ GOSUB CHECK_OPT_FILE
+$! Skip empty directory or file name list.
$!
-$! Define The TEST Files.
-$! NOTE: Some might think this list ugly. However, it's made this way to
-$! reflect the EXE variable in Makefile as closely as possible,
-$! thereby making it fairly easy to verify that the lists are the same.
-$!
-$ TEST_FILES = "BNTEST,ECTEST,ECDSATEST,ECDHTEST,IDEATEST,"+ -
- "MD2TEST,MD4TEST,MD5TEST,HMACTEST,"+ -
- "RC2TEST,RC4TEST,RC5TEST,"+ -
- "DESTEST,SHATEST,SHA1TEST,SHA256T,SHA512T,"+ -
- "MDC2TEST,RMDTEST,"+ -
- "RANDTEST,DHTEST,ENGINETEST,"+ -
- "BFTEST,CASTTEST,SSLTEST,EXPTEST,DSATEST,RSA_TEST,"+ -
- "EVP_TEST,JPAKETEST"
-$! Should we add MTTEST,PQ_TEST,LH_TEST,DIVTEST,TABTEST as well?
-$
-$ TCPIP_PROGRAMS = ",,"
-$ IF COMPILER .EQS. "VAXC" THEN -
- TCPIP_PROGRAMS = ",SSLTEST,"
+$ TEST_DIR = T_D_'T_D_N'
+$ TEST_FILES = T_F_'T_D_N'
+$ IF ((TEST_DIR .EQS. "") .OR. (TEST_FILES .EQS. "")) THEN GOTO NEXT_DIR
$!
$! Define A File Counter And Set It To "0".
$!
-$ FILE_COUNTER = 0
+$ FILE_COUNTER = 0
$!
-$! Top Of The File Loop.
+$! Top Of The File Loop.
$!
-$ NEXT_FILE:
+$ NEXT_FILE:
$!
-$! O.K, Extract The File Name From The File List.
+$! O.K, Extract The File Name From The File List.
$!
-$ FILE_NAME = F$ELEMENT(FILE_COUNTER,",",TEST_FILES)
+$ FILE_NAME = F$ELEMENT(FILE_COUNTER,",",TEST_FILES)
$!
-$! Check To See If We Are At The End Of The File List.
+$! Check To See If We Are At The End Of The File List.
$!
-$ IF (FILE_NAME.EQS.",") THEN GOTO FILE_DONE
+$ IF (FILE_NAME.EQS.",") THEN GOTO FILE_DONE
$!
-$! Increment The Counter.
+$! Increment The Counter.
$!
-$ FILE_COUNTER = FILE_COUNTER + 1
+$ FILE_COUNTER = FILE_COUNTER + 1
$!
-$! Create The Source File Name.
+$! Create The Source File Name.
$!
-$ SOURCE_FILE = "SYS$DISK:[]" + FILE_NAME + ".C"
+$ SOURCE_FILE = "SYS$DISK:''TEST_DIR'" + FILE_NAME + ".C"
$!
-$! Create The Object File Name.
+$! Create The Object File Name.
$!
-$ OBJECT_FILE = OBJ_DIR + FILE_NAME + ".OBJ"
+$ OBJECT_FILE = OBJ_DIR + FILE_NAME + ".OBJ"
$!
-$! Create The Executable File Name.
+$! Create The Executable File Name.
$!
-$ EXE_FILE = EXE_DIR + FILE_NAME + ".EXE"
-$ ON WARNING THEN GOTO NEXT_FILE
+$ EXE_FILE = EXE_DIR + FILE_NAME + ".EXE"
+$ ON WARNING THEN GOTO NEXT_FILE
$!
-$! Check To See If The File We Want To Compile Actually Exists.
+$! Check To See If The File We Want To Compile Actually Exists.
$!
-$ IF (F$SEARCH(SOURCE_FILE).EQS."")
-$ THEN
+$ IF (F$SEARCH(SOURCE_FILE).EQS."")
+$ THEN
$!
-$! Tell The User That The File Dosen't Exist.
+$! Tell The User That The File Dosen't Exist.
$!
-$ WRITE SYS$OUTPUT ""
-$ WRITE SYS$OUTPUT "The File ",SOURCE_FILE," Dosen't Exist."
-$ WRITE SYS$OUTPUT ""
+$ WRITE SYS$OUTPUT ""
+$ WRITE SYS$OUTPUT "The File ",SOURCE_FILE," Dosen't Exist."
+$ WRITE SYS$OUTPUT ""
$!
-$! Exit The Build.
+$! Exit The Build.
$!
-$ GOTO EXIT
-$ ENDIF
+$ GOTO EXIT
+$ ENDIF
$!
-$! Tell The User What We Are Building.
+$! Tell The User What We Are Building.
$!
-$ WRITE SYS$OUTPUT "Building The ",FILE_NAME," Test Program."
+$ WRITE SYS$OUTPUT "Building The ",FILE_NAME," Test Program."
$!
-$! Compile The File.
+$! Compile The File.
$!
-$ ON ERROR THEN GOTO NEXT_FILE
-$ CC/OBJECT='OBJECT_FILE' /PREFIX=ALL -
-
/INCLUDE=(SYS$DISK:[-],SYS$DISK:[-.CRYPTO],SYS$DISK:[-.CRYPTO.X509V3],SYS$DISK:[-.INCLUDE.OPENSSL])
-
- 'SOURCE_FILE'
-$ ON WARNING THEN GOTO NEXT_FILE
+$ ON ERROR THEN GOTO NEXT_FILE
+$ CC /OBJECT='OBJECT_FILE' 'SOURCE_FILE'
+$ ON WARNING THEN GOTO NEXT_FILE
$!
-$! Check If What We Are About To Compile Works Without A TCP/IP Library.
+$! Check If What We Are About To Compile Works Without A TCP/IP Library.
$!
-$ IF ((TCPIP_LIB.EQS."").AND.((TCPIP_PROGRAMS-FILE_NAME).NES.TCPIP_PROGRAMS))
-$ THEN
+$ IF ((TCPIP_LIB.EQS."").AND.((TCPIP_PROGRAMS-FILE_NAME).NES.TCPIP_PROGRAMS))
+$ THEN
$!
-$! Inform The User That A TCP/IP Library Is Needed To Compile This Program.
+$! Inform The User That A TCP/IP Library Is Needed To Compile This Program.
$!
-$ WRITE SYS$OUTPUT FILE_NAME," Needs A TCP/IP Library. Can't Link.
Skipping..."
-$ GOTO NEXT_FILE
+$ WRITE SYS$OUTPUT -
+ FILE_NAME," Needs A TCP/IP Library. Can't Link. Skipping..."
+$ GOTO NEXT_FILE
$!
-$! End The TCP/IP Library Check.
+$! End The TCP/IP Library Check.
$!
-$ ENDIF
+$ ENDIF
$!
-$! Link The Program, Check To See If We Need To Link With RSAREF Or Not.
-$! Check To See If We Are To Link With A Specific TCP/IP Library.
+$! Link The Program, Check To See If We Need To Link With RSAREF Or Not.
+$! Check To See If We Are To Link With A Specific TCP/IP Library.
$!
-$ IF (TCPIP_LIB.NES."")
-$ THEN
+$ IF (TCPIP_LIB.NES."")
+$ THEN
$!
-$! Don't Link With The RSAREF Routines And TCP/IP Library.
+$! Don't Link With The RSAREF Routines And TCP/IP Library.
$!
-$ LINK/'DEBUGGER'/'TRACEBACK' /EXE='EXE_FILE' -
- 'OBJECT_FILE', -
- 'SSL_LIB'/LIBRARY,'CRYPTO_LIB'/LIBRARY, -
- 'TCPIP_LIB','OPT_FILE'/OPTION
+$ LINK /'DEBUGGER' /'TRACEBACK' /EXECUTABLE = 'EXE_FILE' -
+ 'OBJECT_FILE', -
+ 'SSL_LIB' /LIBRARY, -
+ 'CRYPTO_LIB' /LIBRARY, -
+ 'TCPIP_LIB', -
+ 'OPT_FILE' /OPTIONS
$!
-$! Else...
+$! Else...
$!
-$ ELSE
+$ ELSE
$!
-$! Don't Link With The RSAREF Routines And Link With A TCP/IP Library.
+$! Don't Link With The RSAREF Routines And Link With A TCP/IP Library.
$!
-$ LINK/'DEBUGGER'/'TRACEBACK' /EXE='EXE_FILE' -
- 'OBJECT_FILE', -
- 'SSL_LIB'/LIBRARY,'CRYPTO_LIB'/LIBRARY, -
- 'OPT_FILE'/OPTION
+$ LINK /'DEBUGGER' /'TRACEBACK' /EXECUTABLE = 'EXE_FILE' -
+ 'OBJECT_FILE', -
+ 'SSL_LIB' /LIBRARY, -
+ 'CRYPTO_LIB' /LIBRARY, -
+ 'OPT_FILE' /OPTIONS
$!
-$! End The TCP/IP Library Check.
+$! End The TCP/IP Library Check.
$!
-$ ENDIF
+$ ENDIF
$!
-$! Go Back And Do It Again.
+$! Go Back And Do It Again.
$!
-$ GOTO NEXT_FILE
+$ GOTO NEXT_FILE
$!
$! All Done With This Library Part.
$!
$ FILE_DONE:
+$ GOTO NEXT_DIR
+$!
+$ DIR_DONE:
$!
$! All Done, Time To Exit.
$!
@@ -281,10 +322,10 @@
$ CREATE 'OPT_FILE'
$DECK
!
-! Default System Options File To Link Agianst
-! The Sharable VAX C Runtime Library.
+! Default System Options File To Link Against
+! The Shareable VAX C Runtime Library.
!
-SYS$SHARE:VAXCRTL.EXE/SHARE
+SYS$SHARE:VAXCRTL.EXE /SHAREABLE
$EOD
$!
$! End The Option File Check.
@@ -310,11 +351,11 @@
$ CREATE 'OPT_FILE'
$DECK
!
-! Default System Options File To Link Agianst
-! The Sharable C Runtime Library.
+! Default System Options File To Link Against
+! The Shareable C Runtime Library.
!
-GNU_CC:[000000]GCCLIB/LIBRARY
-SYS$SHARE:VAXCRTL/SHARE
+GNU_CC:[000000]GCCLIB.OLB /LIBRARY
+SYS$SHARE:VAXCRTL.EXE /SHAREABLE
$EOD
$!
$! End The Option File Check.
@@ -345,10 +386,10 @@
$ CREATE 'OPT_FILE'
$DECK
!
-! Default System Options File To Link Agianst
-! The Sharable DEC C Runtime Library.
+! Default System Options File To Link Against
+! The Shareable DEC C Runtime Library.
!
-SYS$SHARE:DECC$SHR.EXE/SHARE
+SYS$SHARE:DECC$SHR.EXE /SHAREABLE
$EOD
$!
$! Else...
@@ -360,11 +401,11 @@
$ CREATE 'OPT_FILE'
$DECK
!
-! Default System Options File For non-VAX To Link Agianst
-! The Sharable C Runtime Library.
+! Default System Options File For non-VAX To Link Against
+! The Shareable C Runtime Library.
!
-SYS$SHARE:CMA$OPEN_LIB_SHR/SHARE
-SYS$SHARE:CMA$OPEN_RTL/SHARE
+SYS$SHARE:CMA$OPEN_LIB_SHR.EXE /SHAREABLE
+SYS$SHARE:CMA$OPEN_RTL.EXE /SHAREABLE
$EOD
$!
$! End The DEC C Option File Check.
@@ -622,9 +663,9 @@
$!
$ CC = "CC"
$ IF ARCH.EQS."VAX" .AND. F$TRNLNM("DECC$CC_DEFAULT").NES."/DECC" -
- THEN CC = "CC/DECC"
-$ CC = CC + "/''CC_OPTIMIZE'/''DEBUGGER'/STANDARD=ANSI89" + -
- "/NOLIST/PREFIX=ALL" + -
+ THEN CC = "CC /DECC"
+$ CC = CC + "/''CC_OPTIMIZE' /''DEBUGGER' /STANDARD=ANSI89" + -
+ "/NOLIST /PREFIX=ALL" + -
"/INCLUDE=(SYS$DISK:[-],SYS$DISK:[-.CRYPTO])" + CCEXTRAFLAGS
$!
$! Define The Linker Options File Name.
@@ -656,14 +697,14 @@
$ WRITE SYS$OUTPUT "There is no VAX C on ''ARCH'!"
$ EXIT
$ ENDIF
-$ IF F$TRNLNM("DECC$CC_DEFAULT").EQS."/DECC" THEN CC = "CC/VAXC"
-$ CC = CC + "/''CC_OPTIMIZE'/''DEBUGGER'/NOLIST" + -
+$ IF F$TRNLNM("DECC$CC_DEFAULT").EQS."/DECC" THEN CC = "CC /VAXC"
+$ CC = CC + "/''CC_OPTIMIZE' /''DEBUGGER' /NOLIST" + -
"/INCLUDE=(SYS$DISK:[-],SYS$DISK:[-.CRYPTO])" + CCEXTRAFLAGS
$ CCDEFS = CCDEFS + ",""VAXC"""
$!
$! Define <sys> As SYS$COMMON:[SYSLIB]
$!
-$ DEFINE/NOLOG SYS SYS$COMMON:[SYSLIB]
+$ DEFINE /NOLOG SYS SYS$COMMON:[SYSLIB]
$!
$! Define The Linker Options File Name.
$!
@@ -688,7 +729,7 @@
$!
$! Use GNU C...
$!
-$ CC = "GCC/NOCASE_HACK/''GCC_OPTIMIZE'/''DEBUGGER'/NOLIST" + -
+$ CC = "GCC /NOCASE_HACK /''GCC_OPTIMIZE' /''DEBUGGER' /NOLIST" + -
"/INCLUDE=(SYS$DISK:[-],SYS$DISK:[-.CRYPTO])" + CCEXTRAFLAGS
$!
$! Define The Linker Options File Name.
@@ -723,7 +764,7 @@
$!
$! Show user the result
$!
-$ WRITE/SYMBOL SYS$OUTPUT "Main Compiling Command: ",CC
+$ WRITE /SYMBOL SYS$OUTPUT "Main Compiling Command: ", CC
$!
$! Else The User Entered An Invalid Arguement.
$!
@@ -757,7 +798,7 @@
$!
$! Set the library to use SOCKETSHR
$!
-$ TCPIP_LIB = "SYS$DISK:[-.VMS]SOCKETSHR_SHR.OPT/OPT"
+$ TCPIP_LIB = "SYS$DISK:[-.VMS]SOCKETSHR_SHR.OPT /OPTIONS"
$!
$! Done with SOCKETSHR
$!
@@ -768,7 +809,7 @@
$ IF P3.EQS."MULTINET"
$ THEN
$!
-$! Set the library to use UXC emulation.
+$! Set the library to use UCX emulation.
$!
$ P3 = "UCX"
$!
@@ -783,13 +824,13 @@
$!
$! Set the library to use UCX.
$!
-$ TCPIP_LIB = "SYS$DISK:[-.VMS]UCX_SHR_DECC.OPT/OPT"
+$ TCPIP_LIB = "SYS$DISK:[-.VMS]UCX_SHR_DECC.OPT /OPTIONS"
$ IF F$TRNLNM("UCX$IPC_SHR") .NES. ""
$ THEN
-$ TCPIP_LIB = "SYS$DISK:[-.VMS]UCX_SHR_DECC_LOG.OPT/OPT"
+$ TCPIP_LIB = "SYS$DISK:[-.VMS]UCX_SHR_DECC_LOG.OPT /OPTIONS"
$ ELSE
$ IF COMPILER .NES. "DECC" .AND. ARCH .EQS. "VAX" THEN -
- TCPIP_LIB = "SYS$DISK:[-.VMS]UCX_SHR_VAXC.OPT/OPT"
+ TCPIP_LIB = "SYS$DISK:[-.VMS]UCX_SHR_VAXC.OPT /OPTIONS"
$ ENDIF
$!
$! Done with UCX
@@ -803,7 +844,7 @@
$!
$! Set the library to use TCPIP (post UCX).
$!
-$ TCPIP_LIB = "SYS$DISK:[-.VMS]TCPIP_SHR_DECC.OPT/OPT"
+$ TCPIP_LIB = "SYS$DISK:[-.VMS]TCPIP_SHR_DECC.OPT /OPTIONS"
$!
$! Done with TCPIP
$!
@@ -901,7 +942,7 @@
$!
$! Set up the logical name OPENSSL to point at the include directory
$!
-$ DEFINE OPENSSL/NOLOG '__INCLUDE'
+$ DEFINE OPENSSL /NOLOG '__INCLUDE'
$!
$! Done
$!
@@ -915,7 +956,7 @@
$ THEN
$ DEASSIGN OPENSSL
$ ELSE
-$ DEFINE/NOLOG OPENSSL '__SAVE_OPENSSL'
+$ DEFINE /NOLOG OPENSSL '__SAVE_OPENSSL'
$ ENDIF
$!
$! Done
I added "test/igetest" to the ".c" file list (*_32), but I didn't
check the inventory, so there could be others which should be added.
(Some appear only as comments in the list, and I've forgotten why (if I
ever knew).) It all seemed to work better than what came with the
0.9.8m kit, so I didn't look at it very closely. I might have cared
more back at 0.9.8k and/or 0.9.8l.
I assume that the rest of the no-copy methodology from 0.9.8l could
be dragged into 0.9.8m, too, but my desire to waste my time has waned.
------------------------------------------------------------------------
Steven M. Schweda s...@antinode-info
382 South Warwick Street (+1) 651-699-9818
Saint Paul MN 55105-2547
______________________________________________________________________
OpenSSL Project http://www.openssl.org
Development Mailing List openssl-dev@openssl.org
Automated List Manager majord...@openssl.org
