Dear Thanassi,
thank you very much for your interest! First of all let me inform you
that you are right and I am going with the first (a) approach
(nova-network).
The guide I was following and the place on which the specific problem
arises is this one:
http://docs.openstack.org/havana/install-guide/install/yum/content/nova-network.html
As you can see by yourself many people on the comment session below are
trying to understand how to move on with the br100 interface.
In my case the interface wasn't created automatically (although in a
previous bug that I 've found the say that this was fixed but apparently
it hasn't been in my case). So I 've tried to move on and created the
br100 on the compute node without success. If I understand correctly,
according to your suggestion the br100 has to exist on the controller
node as well. Am I right? Should I create the br100 on both nodes?? Do
you have any further suggestions on how to assign floating (public) IPs
to the VMs? Currently I am having two nodes (controller + compute) with
two NIC interfaces each! One of them is used in order to connect
directly each to node to the other, while the other is used to connect
to the public LAN with a static IP. Any help and configuration schema
much appreciated!
All the best,
G.
On Tue, 07 Jan 2014 11:06:42 +0200, Thanassis Parathyras wrote:
Hi George,
It would be a pleasure to help you on this, do you still have
problems with the deployment?
In OpenStack there are two types of networking that can be used
a)nova-network and b)neutron.
Given your specified question i assume you are going with option a),
then in that case the br100 bridge should be present (manually
created
- if you follow a manual deployment) on the controller node.
May be you can provide the link of the guide you are following so
that we check if there is a need for correction on this.
One more thing, since you are using Centos you can consider using
RedHat RDO ( http://openstack.redhat.com ) for the deployment.
Feel free to contact me with regard to any issues you have.
Best regards,
Thanassis
Thanassis Parathyras
Virtual Trip Ltd.
e aparathy...@vtrip.net
w www.vtrip.net
t +30 2106756112
f +30 2106756527
skype-id: aparathyras
--------------------------------
This transmission (including any attachments) from the Virtual Trip
Group of companies is exclusively addressed to the above named
recipients and is bound to contain privileged and confidential
information. Disclosure, distribution, copying or any other use of
this message is strictly prohibited and may breach intellectual
property provisions. In case of fault transmission please delete
e-mail message and notify us by reply immediately.
On 27/12/2013 8:12 μμ, Georgios Dimitrakakis wrote:
Hi people!
I am following the exact steps of the "Openstack Installation Guide"
for Havana on a CentOS 6.5
The problem is that when I try create the network on the controller
node using this :
nova --debug network-create vmnet --fixed-range-v4=x.x.x.x/32
--bridge-interface=br100 --multi-host=T
I get an error that the br100 interface cannot be found.
So, my question is the following: should this interface appear on
the controller node , on the compute node or on both nodes?
What do I have to do to set it up properly since it doesn't appear
on any of them??
I have found this bug for CentOS 6.4 and I am not sure that has been
corrected for 6.5.
Could someone help me a bit with this??
Best,
G.
_______________________________________________
Mailing list:
http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack
Post to : openstack@lists.openstack.org
Unsubscribe :
http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack
--
_______________________________________________
Mailing list: http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack
Post to : openstack@lists.openstack.org
Unsubscribe : http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack
