Yes I I have it set up in nova.conf and neutron.conf On Wed, Apr 20, 2016 at 9:11 AM, Eugen Block <ebl...@nde.ag> wrote:
> And did you change it to auth_type instead of auth_plugin? Also you should > make sure that this option is in the correct section of your config file, > for example > > [keystone_authtoken] > ... > auth_type = password > > or > > [neutron] > ... > auth_type = password > > > Regards, > Eugen > > > Zitat von Paras pradhan <pradhanpa...@gmail.com>: > > Hi Eugen, >> >> Thanks. Log says its an error. Here is the full log. >> http://pastebin.com/K1f4pJhB >> >> -Paras. >> >> On Tue, Apr 19, 2016 at 2:05 AM, Eugen Block <ebl...@nde.ag> wrote: >> >> Hi Paras, >>> >>> the option auth_plugin is deprecated (from nova.conf): >>> >>> ---cut here--- >>> # Authentication type to load (unknown value) >>> # Deprecated group/name - [DEFAULT]/auth_plugin >>> auth_type = password >>> ---cut here--- >>> >>> But as far as I can tell, you should only get a warning, not an error, >>> I've seen some of these warnings in my logs, but it works (I work with >>> openSUSE). To get Mitaka working at all I simply tried to set the same >>> options as in my working Liberty configs, and then I searched for >>> deprecation warnings and additional options mentioned in the Mitaka >>> guide. >>> >>> Hope this helps! >>> >>> Regards, >>> Eugen >>> >>> >>> Zitat von Paras pradhan <pradhanpa...@gmail.com>: >>> >>> >>> Can somebody share the nova.conf and neutron.conf from working mitaka? I >>> am >>> >>>> also following the same guide and ran into a problem. >>>> >>>> 2016-04-18 16:51:07.982 2447 ERROR nova.api.openstack.extensions >>>> NoSuchOptError: no such option in group neutron: auth_plugin >>>> >>>> Not sure what did I do wrong. It was while launching an instance. >>>> >>>> >>>> Thanks >>>> >>>> Paras. >>>> >>>> On Mon, Apr 18, 2016 at 2:46 AM, Nasir Mahmood <nasir.mahm...@gmail.com >>>> > >>>> wrote: >>>> >>>> Martinx, >>>> >>>>> >>>>> glad to see that you are able to dig into the typo issue. I remember, I >>>>> had to completely re-re-clean install my virtual setup of OpenStack >>>>> for a >>>>> POC back in 2015 , just because I have had miss-configured my >>>>> neutron.conf's mysql DB connector information. >>>>> >>>>> Cheers! >>>>> >>>>> >>>>> Regards, >>>>> Nasir Mahmood >>>>> >>>>> On Mon, Apr 18, 2016 at 7:02 AM, Martinx - ジェームズ < >>>>> thiagocmarti...@gmail.com> wrote: >>>>> >>>>> FIXED!! I knew it was a typo somewhere! LOL >>>>> >>>>>> >>>>>> >>>>>> >>>>>> >>>>>> https://github.com/tmartinx/svauto/commit/40ce6566cd0e6435cf75bb34116b6c3bacbeaf02 >>>>>> >>>>>> Thank you guys! >>>>>> >>>>>> Sorry about the buzz on TWO mail lists... >>>>>> >>>>>> At least, now we know that Nova silent fail on its start up, if >>>>>> somethings aren't configured according... And there is no verification >>>>>> steps to test the communication between Nova and Neutron. >>>>>> >>>>>> Mitaka is working now on Xenial! YAY!! >>>>>> >>>>>> I'm about to commit changes to enable OpenvSwitch with DPDK and >>>>>> multi-node deployments, fully automated! >>>>>> >>>>>> Cheers! >>>>>> Thiago >>>>>> >>>>>> On 17 April 2016 at 21:26, Martinx - ジェームズ <thiagocmarti...@gmail.com >>>>>> > >>>>>> wrote: >>>>>> >>>>>> On 17 April 2016 at 17:39, Martinx - ジェームズ <thiagocmarti...@gmail.com >>>>>> > >>>>>> >>>>>>> wrote: >>>>>>> >>>>>>> Guys, >>>>>>> >>>>>>>> >>>>>>>> I am trying to deploy Mitaka, on top of Ubuntu 16.04, by using the >>>>>>>> following document: >>>>>>>> >>>>>>>> http://docs.openstack.org/mitaka/install-guide-ubuntu >>>>>>>> >>>>>>>> Yes, I know, the above document is for installing Mitaka on top of >>>>>>>> Ubuntu 14.04 but, from what I understand, the only difference is >>>>>>>> that >>>>>>>> on >>>>>>>> Xenial, there is no need to add the Ubuntu Mitaka Cloud Archive, >>>>>>>> since >>>>>>>> Mitaka is the default on Xenial, so, I can follow that document, >>>>>>>> right? >>>>>>>> =) >>>>>>>> >>>>>>>> At first, OpenStack installation goes okay, without any errors, all >>>>>>>> services comes up, etc... However, it is not possible to launch an >>>>>>>> Instance. >>>>>>>> >>>>>>>> *** Errors on launching the Instance: >>>>>>>> >>>>>>>> - Right after launching it: >>>>>>>> >>>>>>>> https://paste.ubuntu.com/15902503/ >>>>>>>> >>>>>>>> - Spawning it, after Glance finishes the download, similar error a >>>>>>>> second time: >>>>>>>> >>>>>>>> https://paste.ubuntu.com/15902556/ >>>>>>>> >>>>>>>> What am I missing? >>>>>>>> >>>>>>>> Apparently, Nova is not authorized to talk with Neutron but, I am >>>>>>>> following the docs (maybe it is just a typo somewhere?)... >>>>>>>> >>>>>>>> Also, I have an Ansible automation to deploy it, so, it is less >>>>>>>> error >>>>>>>> prone. And however can help me, will see how I am deploying it. >>>>>>>> >>>>>>>> I see no error on Admin Dashboard, all services are up. >>>>>>>> >>>>>>>> NOTE: My Ansible playbooks is in a sense, " >>>>>>>> docs.openstack.org/mitaka/install-guide-ubuntu fully automated", it >>>>>>>> is >>>>>>>> very close to it, step-by-step. >>>>>>>> >>>>>>>> How can I debug this? I mean, how can I try to do, what Nova is >>>>>>>> doing >>>>>>>> (its connection with Neutron), to make sure that the settings are in >>>>>>>> place >>>>>>>> correctly? >>>>>>>> >>>>>>>> Here is how I am installing Mitaka on Xenial: >>>>>>>> >>>>>>>> --- >>>>>>>> 1- Install Ubuntu 16.04 server 64-bit on bare-metal; >>>>>>>> >>>>>>>> * Configure your /etc/hostname and /etc/hosts. >>>>>>>> >>>>>>>> DETAILS: >>>>>>>> https://github.com/tmartinx/svauto/blob/dev/README.OpenStack.md >>>>>>>> >>>>>>>> >>>>>>>> 2- Clone the automation: >>>>>>>> >>>>>>>> cd ~ >>>>>>>> git clone https://github.com/tmartinx/svauto.git >>>>>>>> >>>>>>>> >>>>>>>> 3- Run the automation to install OpenStack (all-in-one) >>>>>>>> >>>>>>>> cd ~/svauto >>>>>>>> >>>>>>>> ./os-deploy.sh --br-mode=LBR --use-dummies --base-os=ubuntu16 >>>>>>>> --base-os-upgrade=yes --openstack-release=mitaka >>>>>>>> --openstack-installation >>>>>>>> --dry-run >>>>>>>> >>>>>>>> ansible-playbook -c local site-openstack.yml --extra-vars >>>>>>>> "openstack_installation=yes" >>>>>>>> --- >>>>>>>> >>>>>>>> NOTE: If you don't use "--dry-run" option, Ansible will be executed >>>>>>>> automatically by "os-deploy.sh". >>>>>>>> >>>>>>>> I am sharing the Ansible playbooks, because it will be easier to >>>>>>>> see >>>>>>>> what I am doing. >>>>>>>> >>>>>>>> About the relevant configuration blocks, I believe that I have it >>>>>>>> properly configured (I followed Mitaka docs), like this: >>>>>>>> >>>>>>>> * neutron.conf: >>>>>>>> - >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> https://github.com/tmartinx/svauto/blob/dev/ansible/roles/os_neutron_aio/templates/mitaka/neutron.conf >>>>>>>> - >>>>>>>> >>>>>>>> * nova.conf: >>>>>>>> - >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> https://github.com/tmartinx/svauto/blob/dev/ansible/roles/os_nova_aio/templates/mitaka/nova.conf >>>>>>>> - >>>>>>>> >>>>>>>> I already installed OpenStack many, many, many times, since Havana >>>>>>>> release, I'm confident that I am doing it right but, of course, >>>>>>>> maybe >>>>>>>> I did >>>>>>>> something wrong this time... =P >>>>>>>> >>>>>>>> I appreciate any help! >>>>>>>> >>>>>>>> Thanks! >>>>>>>> Thiago >>>>>>>> >>>>>>>> >>>>>>>> Hey guys, >>>>>>> >>>>>>> I am reviewing everything, to make sure that my automation matches >>>>>>> docs.openstack.org/mitaka/install-guide-ubuntu/ in details. >>>>>>> >>>>>>> Two things... >>>>>>> >>>>>>> --- >>>>>>> 1- All the verification steps (from official doc) passed >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> http://docs.openstack.org/mitaka/install-guide-ubuntu/keystone-verify.html >>>>>>> - passed >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> http://docs.openstack.org/mitaka/install-guide-ubuntu/keystone-openrc.html >>>>>>> - passed >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> http://docs.openstack.org/mitaka/install-guide-ubuntu/glance-verify.html >>>>>>> - passed >>>>>>> >>>>>>> >>>>>>> >>>>>>> http://docs.openstack.org/mitaka/install-guide-ubuntu/nova-verify.html >>>>>>> - passed >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> http://docs.openstack.org/mitaka/install-guide-ubuntu/neutron-verify.html >>>>>>> - passed >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> http://docs.openstack.org/mitaka/install-guide-ubuntu/neutron-verify-option2.html >>>>>>> - passed >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> http://docs.openstack.org/mitaka/install-guide-ubuntu/horizon-verify.html >>>>>>> - passed (mine doesn't have /horizon) >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> http://docs.openstack.org/mitaka/install-guide-ubuntu/cinder-verify.html >>>>>>> - passed but, I'm not using any cinder-volume yet >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> http://docs.openstack.org/mitaka/install-guide-ubuntu/launch-instance-selfservice.html >>>>>>> - "6. Launch the instance" - FAIL >>>>>>> >>>>>>> NOTE: I can create Networks, Subnets, Routers... I can see the >>>>>>> Linux >>>>>>> Namespaces at the Neutron L3 Router (All-in-One) >>>>>>> >>>>>>> >>>>>>> 2- This problem happen no matter if deploying it with Linux Bridges >>>>>>> (--br-mode=LBR) or with OpenvSwitch (--br-mode=OVS) >>>>>>> --- >>>>>>> >>>>>>> So, I think that OpenStack should provide more verification steps, >>>>>>> specially to test the communication / authentication between its >>>>>>> different >>>>>>> projects, for example: >>>>>>> >>>>>>> A- Does Nova can communicate with Neutron? How to test this? >>>>>>> >>>>>>> B- Can Nova download images from Glance? Etc... >>>>>>> >>>>>>> >>>>>>> Doing more reviews now... >>>>>>> >>>>>>> >>>>>>> Cheers! >>>>>>> Thiago >>>>>>> >>>>>>> >>>>>>> >>>>>> _______________________________________________ >>>>>> Mailing list: >>>>>> http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack >>>>>> Post to : openstack@lists.openstack.org >>>>>> Unsubscribe : >>>>>> http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack >>>>>> >>>>>> >>>>>> >>>>>> >>>>> -- >>>>> Nasir Mahmood >>>>> >>>>> _______________________________________________ >>>>> Mailing list: >>>>> http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack >>>>> Post to : openstack@lists.openstack.org >>>>> Unsubscribe : >>>>> http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack >>>>> >>>>> >>>>> >>>>> >>> >>> -- >>> Eugen Block voice : +49-40-559 51 75 >>> NDE Netzdesign und -entwicklung AG fax : +49-40-559 51 77 >>> Postfach 61 03 15 >>> D-22423 Hamburg e-mail : ebl...@nde.ag >>> >>> Vorsitzende des Aufsichtsrates: Angelika Mozdzen >>> Sitz und Registergericht: Hamburg, HRB 90934 >>> Vorstand: Jens-U. Mozdzen >>> USt-IdNr. DE 814 013 983 >>> >>> >>> >>> _______________________________________________ >>> Mailing list: >>> http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack >>> Post to : openstack@lists.openstack.org >>> Unsubscribe : >>> http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack >>> >>> > > > -- > Eugen Block voice : +49-40-559 51 75 > NDE Netzdesign und -entwicklung AG fax : +49-40-559 51 77 > Postfach 61 03 15 > D-22423 Hamburg e-mail : ebl...@nde.ag > > Vorsitzende des Aufsichtsrates: Angelika Mozdzen > Sitz und Registergericht: Hamburg, HRB 90934 > Vorstand: Jens-U. Mozdzen > USt-IdNr. DE 814 013 983 > >
_______________________________________________ Mailing list: http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack Post to : openstack@lists.openstack.org Unsubscribe : http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack