Yes . I did. here is my nova.conf. Can you share yours? http://paste.openstack.org/show/494988/
On Thu, Apr 21, 2016 at 7:36 AM, Eugen Block <ebl...@nde.ag> wrote: > Okay, did you restart the respective services on all nodes after the > changes in your config files? If the same error still occurs then you might > haven't found all occurrences of the option auth_plugin, did you replace it > in all config files? I'm just guessing here... > > > > Zitat von Paras pradhan <pradhanpa...@gmail.com>: > > No I still have that error. Other than that I don't see any other errors. >> >> On Wed, Apr 20, 2016 at 9:22 AM, Eugen Block <ebl...@nde.ag> wrote: >> >> So I guess the mentioned error should be resolved? Does it work now? >>> >>> >>> >>> Zitat von Paras pradhan <pradhanpa...@gmail.com>: >>> >>> Yes I I have it set up in nova.conf and neutron.conf >>> >>>> >>>> On Wed, Apr 20, 2016 at 9:11 AM, Eugen Block <ebl...@nde.ag> wrote: >>>> >>>> And did you change it to auth_type instead of auth_plugin? Also you >>>> should >>>> >>>>> make sure that this option is in the correct section of your config >>>>> file, >>>>> for example >>>>> >>>>> [keystone_authtoken] >>>>> ... >>>>> auth_type = password >>>>> >>>>> or >>>>> >>>>> [neutron] >>>>> ... >>>>> auth_type = password >>>>> >>>>> >>>>> Regards, >>>>> Eugen >>>>> >>>>> >>>>> Zitat von Paras pradhan <pradhanpa...@gmail.com>: >>>>> >>>>> Hi Eugen, >>>>> >>>>> >>>>>> Thanks. Log says its an error. Here is the full log. >>>>>> http://pastebin.com/K1f4pJhB >>>>>> >>>>>> -Paras. >>>>>> >>>>>> On Tue, Apr 19, 2016 at 2:05 AM, Eugen Block <ebl...@nde.ag> wrote: >>>>>> >>>>>> Hi Paras, >>>>>> >>>>>> >>>>>>> the option auth_plugin is deprecated (from nova.conf): >>>>>>> >>>>>>> ---cut here--- >>>>>>> # Authentication type to load (unknown value) >>>>>>> # Deprecated group/name - [DEFAULT]/auth_plugin >>>>>>> auth_type = password >>>>>>> ---cut here--- >>>>>>> >>>>>>> But as far as I can tell, you should only get a warning, not an >>>>>>> error, >>>>>>> I've seen some of these warnings in my logs, but it works (I work >>>>>>> with >>>>>>> openSUSE). To get Mitaka working at all I simply tried to set the >>>>>>> same >>>>>>> options as in my working Liberty configs, and then I searched for >>>>>>> deprecation warnings and additional options mentioned in the Mitaka >>>>>>> guide. >>>>>>> >>>>>>> Hope this helps! >>>>>>> >>>>>>> Regards, >>>>>>> Eugen >>>>>>> >>>>>>> >>>>>>> Zitat von Paras pradhan <pradhanpa...@gmail.com>: >>>>>>> >>>>>>> >>>>>>> Can somebody share the nova.conf and neutron.conf from working >>>>>>> mitaka? >>>>>>> I >>>>>>> am >>>>>>> >>>>>>> also following the same guide and ran into a problem. >>>>>>> >>>>>>>> >>>>>>>> 2016-04-18 16:51:07.982 2447 ERROR nova.api.openstack.extensions >>>>>>>> NoSuchOptError: no such option in group neutron: auth_plugin >>>>>>>> >>>>>>>> Not sure what did I do wrong. It was while launching an instance. >>>>>>>> >>>>>>>> >>>>>>>> Thanks >>>>>>>> >>>>>>>> Paras. >>>>>>>> >>>>>>>> On Mon, Apr 18, 2016 at 2:46 AM, Nasir Mahmood < >>>>>>>> nasir.mahm...@gmail.com >>>>>>>> > >>>>>>>> wrote: >>>>>>>> >>>>>>>> Martinx, >>>>>>>> >>>>>>>> >>>>>>>> glad to see that you are able to dig into the typo issue. I >>>>>>>>> remember, I >>>>>>>>> had to completely re-re-clean install my virtual setup of OpenStack >>>>>>>>> for a >>>>>>>>> POC back in 2015 , just because I have had miss-configured my >>>>>>>>> neutron.conf's mysql DB connector information. >>>>>>>>> >>>>>>>>> Cheers! >>>>>>>>> >>>>>>>>> >>>>>>>>> Regards, >>>>>>>>> Nasir Mahmood >>>>>>>>> >>>>>>>>> On Mon, Apr 18, 2016 at 7:02 AM, Martinx - ジェームズ < >>>>>>>>> thiagocmarti...@gmail.com> wrote: >>>>>>>>> >>>>>>>>> FIXED!! I knew it was a typo somewhere! LOL >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> https://github.com/tmartinx/svauto/commit/40ce6566cd0e6435cf75bb34116b6c3bacbeaf02 >>>>>>>>>> >>>>>>>>>> Thank you guys! >>>>>>>>>> >>>>>>>>>> Sorry about the buzz on TWO mail lists... >>>>>>>>>> >>>>>>>>>> At least, now we know that Nova silent fail on its start up, if >>>>>>>>>> somethings aren't configured according... And there is no >>>>>>>>>> verification >>>>>>>>>> steps to test the communication between Nova and Neutron. >>>>>>>>>> >>>>>>>>>> Mitaka is working now on Xenial! YAY!! >>>>>>>>>> >>>>>>>>>> I'm about to commit changes to enable OpenvSwitch with DPDK and >>>>>>>>>> multi-node deployments, fully automated! >>>>>>>>>> >>>>>>>>>> Cheers! >>>>>>>>>> Thiago >>>>>>>>>> >>>>>>>>>> On 17 April 2016 at 21:26, Martinx - ジェームズ < >>>>>>>>>> thiagocmarti...@gmail.com >>>>>>>>>> > >>>>>>>>>> wrote: >>>>>>>>>> >>>>>>>>>> On 17 April 2016 at 17:39, Martinx - ジェームズ < >>>>>>>>>> thiagocmarti...@gmail.com >>>>>>>>>> > >>>>>>>>>> >>>>>>>>>> wrote: >>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> Guys, >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> I am trying to deploy Mitaka, on top of Ubuntu 16.04, by using >>>>>>>>>>>> the >>>>>>>>>>>> following document: >>>>>>>>>>>> >>>>>>>>>>>> http://docs.openstack.org/mitaka/install-guide-ubuntu >>>>>>>>>>>> >>>>>>>>>>>> Yes, I know, the above document is for installing Mitaka on top >>>>>>>>>>>> of >>>>>>>>>>>> Ubuntu 14.04 but, from what I understand, the only difference is >>>>>>>>>>>> that >>>>>>>>>>>> on >>>>>>>>>>>> Xenial, there is no need to add the Ubuntu Mitaka Cloud Archive, >>>>>>>>>>>> since >>>>>>>>>>>> Mitaka is the default on Xenial, so, I can follow that document, >>>>>>>>>>>> right? >>>>>>>>>>>> =) >>>>>>>>>>>> >>>>>>>>>>>> At first, OpenStack installation goes okay, without any errors, >>>>>>>>>>>> all >>>>>>>>>>>> services comes up, etc... However, it is not possible to launch >>>>>>>>>>>> an >>>>>>>>>>>> Instance. >>>>>>>>>>>> >>>>>>>>>>>> *** Errors on launching the Instance: >>>>>>>>>>>> >>>>>>>>>>>> - Right after launching it: >>>>>>>>>>>> >>>>>>>>>>>> https://paste.ubuntu.com/15902503/ >>>>>>>>>>>> >>>>>>>>>>>> - Spawning it, after Glance finishes the download, similar >>>>>>>>>>>> error >>>>>>>>>>>> a >>>>>>>>>>>> second time: >>>>>>>>>>>> >>>>>>>>>>>> https://paste.ubuntu.com/15902556/ >>>>>>>>>>>> >>>>>>>>>>>> What am I missing? >>>>>>>>>>>> >>>>>>>>>>>> Apparently, Nova is not authorized to talk with Neutron but, I >>>>>>>>>>>> am >>>>>>>>>>>> following the docs (maybe it is just a typo somewhere?)... >>>>>>>>>>>> >>>>>>>>>>>> Also, I have an Ansible automation to deploy it, so, it is less >>>>>>>>>>>> error >>>>>>>>>>>> prone. And however can help me, will see how I am deploying it. >>>>>>>>>>>> >>>>>>>>>>>> I see no error on Admin Dashboard, all services are up. >>>>>>>>>>>> >>>>>>>>>>>> NOTE: My Ansible playbooks is in a sense, " >>>>>>>>>>>> docs.openstack.org/mitaka/install-guide-ubuntu fully >>>>>>>>>>>> automated", >>>>>>>>>>>> it >>>>>>>>>>>> is >>>>>>>>>>>> very close to it, step-by-step. >>>>>>>>>>>> >>>>>>>>>>>> How can I debug this? I mean, how can I try to do, what Nova is >>>>>>>>>>>> doing >>>>>>>>>>>> (its connection with Neutron), to make sure that the settings >>>>>>>>>>>> are >>>>>>>>>>>> in >>>>>>>>>>>> place >>>>>>>>>>>> correctly? >>>>>>>>>>>> >>>>>>>>>>>> Here is how I am installing Mitaka on Xenial: >>>>>>>>>>>> >>>>>>>>>>>> --- >>>>>>>>>>>> 1- Install Ubuntu 16.04 server 64-bit on bare-metal; >>>>>>>>>>>> >>>>>>>>>>>> * Configure your /etc/hostname and /etc/hosts. >>>>>>>>>>>> >>>>>>>>>>>> DETAILS: >>>>>>>>>>>> https://github.com/tmartinx/svauto/blob/dev/README.OpenStack.md >>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>> 2- Clone the automation: >>>>>>>>>>>> >>>>>>>>>>>> cd ~ >>>>>>>>>>>> git clone https://github.com/tmartinx/svauto.git >>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>> 3- Run the automation to install OpenStack (all-in-one) >>>>>>>>>>>> >>>>>>>>>>>> cd ~/svauto >>>>>>>>>>>> >>>>>>>>>>>> ./os-deploy.sh --br-mode=LBR --use-dummies --base-os=ubuntu16 >>>>>>>>>>>> --base-os-upgrade=yes --openstack-release=mitaka >>>>>>>>>>>> --openstack-installation >>>>>>>>>>>> --dry-run >>>>>>>>>>>> >>>>>>>>>>>> ansible-playbook -c local site-openstack.yml --extra-vars >>>>>>>>>>>> "openstack_installation=yes" >>>>>>>>>>>> --- >>>>>>>>>>>> >>>>>>>>>>>> NOTE: If you don't use "--dry-run" option, Ansible will be >>>>>>>>>>>> executed >>>>>>>>>>>> automatically by "os-deploy.sh". >>>>>>>>>>>> >>>>>>>>>>>> I am sharing the Ansible playbooks, because it will be easier >>>>>>>>>>>> to >>>>>>>>>>>> see >>>>>>>>>>>> what I am doing. >>>>>>>>>>>> >>>>>>>>>>>> About the relevant configuration blocks, I believe that I have >>>>>>>>>>>> it >>>>>>>>>>>> properly configured (I followed Mitaka docs), like this: >>>>>>>>>>>> >>>>>>>>>>>> * neutron.conf: >>>>>>>>>>>> - >>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>> https://github.com/tmartinx/svauto/blob/dev/ansible/roles/os_neutron_aio/templates/mitaka/neutron.conf >>>>>>>>>>>> - >>>>>>>>>>>> >>>>>>>>>>>> * nova.conf: >>>>>>>>>>>> - >>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>> https://github.com/tmartinx/svauto/blob/dev/ansible/roles/os_nova_aio/templates/mitaka/nova.conf >>>>>>>>>>>> - >>>>>>>>>>>> >>>>>>>>>>>> I already installed OpenStack many, many, many times, since >>>>>>>>>>>> Havana >>>>>>>>>>>> release, I'm confident that I am doing it right but, of course, >>>>>>>>>>>> maybe >>>>>>>>>>>> I did >>>>>>>>>>>> something wrong this time... =P >>>>>>>>>>>> >>>>>>>>>>>> I appreciate any help! >>>>>>>>>>>> >>>>>>>>>>>> Thanks! >>>>>>>>>>>> Thiago >>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>> Hey guys, >>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>> I am reviewing everything, to make sure that my automation >>>>>>>>>>> matches >>>>>>>>>>> docs.openstack.org/mitaka/install-guide-ubuntu/ in details. >>>>>>>>>>> >>>>>>>>>>> Two things... >>>>>>>>>>> >>>>>>>>>>> --- >>>>>>>>>>> 1- All the verification steps (from official doc) passed >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> http://docs.openstack.org/mitaka/install-guide-ubuntu/keystone-verify.html >>>>>>>>>>> - passed >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> http://docs.openstack.org/mitaka/install-guide-ubuntu/keystone-openrc.html >>>>>>>>>>> - passed >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> http://docs.openstack.org/mitaka/install-guide-ubuntu/glance-verify.html >>>>>>>>>>> - passed >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> http://docs.openstack.org/mitaka/install-guide-ubuntu/nova-verify.html >>>>>>>>>>> - passed >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> http://docs.openstack.org/mitaka/install-guide-ubuntu/neutron-verify.html >>>>>>>>>>> - passed >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> http://docs.openstack.org/mitaka/install-guide-ubuntu/neutron-verify-option2.html >>>>>>>>>>> - passed >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> http://docs.openstack.org/mitaka/install-guide-ubuntu/horizon-verify.html >>>>>>>>>>> - passed (mine doesn't have /horizon) >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> http://docs.openstack.org/mitaka/install-guide-ubuntu/cinder-verify.html >>>>>>>>>>> - passed but, I'm not using any cinder-volume yet >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> http://docs.openstack.org/mitaka/install-guide-ubuntu/launch-instance-selfservice.html >>>>>>>>>>> - "6. Launch the instance" - FAIL >>>>>>>>>>> >>>>>>>>>>> NOTE: I can create Networks, Subnets, Routers... I can see the >>>>>>>>>>> Linux >>>>>>>>>>> Namespaces at the Neutron L3 Router (All-in-One) >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> 2- This problem happen no matter if deploying it with Linux >>>>>>>>>>> Bridges >>>>>>>>>>> (--br-mode=LBR) or with OpenvSwitch (--br-mode=OVS) >>>>>>>>>>> --- >>>>>>>>>>> >>>>>>>>>>> So, I think that OpenStack should provide more verification >>>>>>>>>>> steps, >>>>>>>>>>> specially to test the communication / authentication between its >>>>>>>>>>> different >>>>>>>>>>> projects, for example: >>>>>>>>>>> >>>>>>>>>>> A- Does Nova can communicate with Neutron? How to test this? >>>>>>>>>>> >>>>>>>>>>> B- Can Nova download images from Glance? Etc... >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> Doing more reviews now... >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> Cheers! >>>>>>>>>>> Thiago >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> _______________________________________________ >>>>>>>>>>> >>>>>>>>>> Mailing list: >>>>>>>>>> http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack >>>>>>>>>> Post to : openstack@lists.openstack.org >>>>>>>>>> Unsubscribe : >>>>>>>>>> http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> -- >>>>>>>>>> >>>>>>>>> Nasir Mahmood >>>>>>>>> >>>>>>>>> _______________________________________________ >>>>>>>>> Mailing list: >>>>>>>>> http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack >>>>>>>>> Post to : openstack@lists.openstack.org >>>>>>>>> Unsubscribe : >>>>>>>>> http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> -- >>>>>>> Eugen Block voice : +49-40-559 51 75 >>>>>>> NDE Netzdesign und -entwicklung AG fax : +49-40-559 51 77 >>>>>>> Postfach 61 03 15 >>>>>>> D-22423 Hamburg e-mail : ebl...@nde.ag >>>>>>> >>>>>>> Vorsitzende des Aufsichtsrates: Angelika Mozdzen >>>>>>> Sitz und Registergericht: Hamburg, HRB 90934 >>>>>>> Vorstand: Jens-U. Mozdzen >>>>>>> USt-IdNr. DE 814 013 983 >>>>>>> >>>>>>> >>>>>>> >>>>>>> _______________________________________________ >>>>>>> Mailing list: >>>>>>> http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack >>>>>>> Post to : openstack@lists.openstack.org >>>>>>> Unsubscribe : >>>>>>> http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>> -- >>>>> Eugen Block voice : +49-40-559 51 75 >>>>> NDE Netzdesign und -entwicklung AG fax : +49-40-559 51 77 >>>>> Postfach 61 03 15 >>>>> D-22423 Hamburg e-mail : ebl...@nde.ag >>>>> >>>>> Vorsitzende des Aufsichtsrates: Angelika Mozdzen >>>>> Sitz und Registergericht: Hamburg, HRB 90934 >>>>> Vorstand: Jens-U. Mozdzen >>>>> USt-IdNr. DE 814 013 983 >>>>> >>>>> >>>>> >>>>> >>> >>> -- >>> Eugen Block voice : +49-40-559 51 75 >>> NDE Netzdesign und -entwicklung AG fax : +49-40-559 51 77 >>> Postfach 61 03 15 >>> D-22423 Hamburg e-mail : ebl...@nde.ag >>> >>> Vorsitzende des Aufsichtsrates: Angelika Mozdzen >>> Sitz und Registergericht: Hamburg, HRB 90934 >>> Vorstand: Jens-U. Mozdzen >>> USt-IdNr. DE 814 013 983 >>> >>> >>> > > > -- > Eugen Block voice : +49-40-559 51 75 > NDE Netzdesign und -entwicklung AG fax : +49-40-559 51 77 > Postfach 61 03 15 > D-22423 Hamburg e-mail : ebl...@nde.ag > > Vorsitzende des Aufsichtsrates: Angelika Mozdzen > Sitz und Registergericht: Hamburg, HRB 90934 > Vorstand: Jens-U. Mozdzen > USt-IdNr. DE 814 013 983 > >
_______________________________________________ Mailing list: http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack Post to : openstack@lists.openstack.org Unsubscribe : http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack