Hi,
here are some tests results of 13.1 images. Results are pretty bad ATM. :(
* Beagleboard xM rev B :
- Image fails to boot with the following error message:
********************************************************************************
[ 8.109588] Freeing unused kernel memory: 532K (c07e5000 - c086a000)
setterm: cannot (un)set powersave mode: Inappropriate ioctl for device
/usr/sbin/klogconsole
Thu Nov 7 00:00:00 UTC 2013
[ 13.670684] ehci-omap ehci-omap.0: Can't get PHY device for port 1: -6
[ 15.271728] hub 1-0:1.0: Cannot enable port 1. Maybe the USB cable is bad?
[437097081.923981] Including oem partition info file
[437097082.043030] Searching for boot device...
[ 16.471771] hub 1-0:1.0: Cannot enable port 1. Maybe the USB cable is bad?
[ 17.671752] hub 1-0:1.0: Cannot enable port 1. Maybe the USB cable is bad?
[ 18.925598] hub 1-0:1.0: Cannot enable port 1. Maybe the USB cable is bad?
[ 18.933227] hub 1-0:1.0: unable to enumerate USB device on port 1
[437097110.607544] Failed to find boot device !
[437097110.639527] rebootException: reboot in 120 sec...
********************************************************************************
The USB problem seems to be known:
http://www.spinics.net/lists/linux-omap/msg90670.html
Is boot problem related? I do not know.
D6 and D7 lights (related to MMC) are turned OFF when kernel start whereas it
was ON with u-boot.
So, MMC seems to be not working at all. It seems that kernel modules (at least
omap mmc modules) from initrd are not loaded. Very strange.
* Pandaboard rev A3 :
- Image hangs early with the following message: (Tested with 2 SD cards).
********************************************************************************
U-Boot SPL 2013.04 (Oct 21 2013 - 22:37:21)
OMAP4430 ES2.2
OMAP SD/MMC: 0
********************************************************************************
Is there anyone who could test those images on their baords, especially
pandaboard?
Guillaume
--
To unsubscribe, e-mail: [email protected]
To contact the owner, e-mail: [email protected]
