On 07.11.2013, at 11:14, Guillaume Gardet <guillaume.gar...@free.fr> wrote:
> Hi, > > here are some tests results of 13.1 images. Results are pretty bad ATM. :( > > > * Beagleboard xM rev B : > - Image fails to boot with the following error message: > ******************************************************************************** > [ 8.109588] Freeing unused kernel memory: 532K (c07e5000 - c086a000) > setterm: cannot (un)set powersave mode: Inappropriate ioctl for device > /usr/sbin/klogconsole > Thu Nov 7 00:00:00 UTC 2013 > [ 13.670684] ehci-omap ehci-omap.0: Can't get PHY device for port 1: -6 > [ 15.271728] hub 1-0:1.0: Cannot enable port 1. Maybe the USB cable is bad? > [437097081.923981] Including oem partition info file > [437097082.043030] Searching for boot device... > [ 16.471771] hub 1-0:1.0: Cannot enable port 1. Maybe the USB cable is bad? > [ 17.671752] hub 1-0:1.0: Cannot enable port 1. Maybe the USB cable is bad? > [ 18.925598] hub 1-0:1.0: Cannot enable port 1. Maybe the USB cable is bad? > [ 18.933227] hub 1-0:1.0: unable to enumerate USB device on port 1 > [437097110.607544] Failed to find boot device ! > [437097110.639527] rebootException: reboot in 120 sec... > ******************************************************************************** > > The USB problem seems to be known: > http://www.spinics.net/lists/linux-omap/msg90670.html > Is boot problem related? I do not know. > > D6 and D7 lights (related to MMC) are turned OFF when kernel start whereas it > was ON with u-boot. > So, MMC seems to be not working at all. It seems that kernel modules (at > least omap mmc modules) from initrd are not loaded. Very strange. If you boot with kiwidebug=1 you should be able to get a shell and check whether the modules are loaded or not. > * Pandaboard rev A3 : > - Image hangs early with the following message: (Tested with 2 SD cards). > ******************************************************************************** > U-Boot SPL 2013.04 (Oct 21 2013 - 22:37:21) > OMAP4430 ES2.2 > OMAP SD/MMC: 0 > ******************************************************************************** > > > Is there anyone who could test those images on their baords, especially > pandaboard? Andrew reported the same issue. Could you please try with 12.3's SPL (MLO) and/or u-boot.bin to boil down which component is at fault here? Alex -- To unsubscribe, e-mail: opensuse-arm+unsubscr...@opensuse.org To contact the owner, e-mail: opensuse-arm+ow...@opensuse.org
