Hi Guillaume, I bought a Rasppery-Pi(B) board to finally be able to test something I have the same trouble. So far the board does not boot. my current disk layout looks like this for the test image:
parted /tmp/LimeJeOS-13.1.armv6l-1.13.1.raw print Model: (file) Disk /tmp/LimeJeOS-13.1.armv6l-1.13.1.raw: 774MB Sector size (logical/physical): 512B/512B Partition Table: msdos Number Start End Size Type File system Flags 1 1049kB 211MB 210MB primary fat32 boot, lba, type=0c 2 212MB 774MB 562MB primary lvm, type=8e > If I resize FAT partition with YaST partitionner from 200 MB to 196 MB > or less, it does boot. Now that you remind me on this I remember you wrote me a mail I'm sorry I totally have missed that. So you are saying if I set <type ... bootpartsize="100M"/> it should work ? That sounds strange but I will build a new image with that size and see > Moreover, raspberrypi-firmware package has bootinclude flag set > to true but files ending with *.dat are missing from BOOT partition. > Is there any filter for such a file? yes I fixed some bugs in that area. I also added support for the bootloader="berryboot" so that we don't have to do this nasty things with config.txt and cmdline.txt in our handmade scripts As soon as I get my image to fly I will update the kiwi in 13.1:Ports Regards, Marcus -- Public Key available gpg --keyserver pgp.mit.edu --recv-keys 0xCCE3C6A2 ------------------------------------------------------- Marcus Schäfer (Res. & Dev.) SUSE LINUX Products GmbH Tel: 0911-740 53 0 Maxfeldstrasse 5 FAX: 0911-740 53 479 D-90409 Nürnberg GF: Jeff Hawn,Jennifer Guild, Felix Imendörffer HRB: 21284 (AG Nürnberg) Germany http://www.suse.de ------------------------------------------------------- -- To unsubscribe, e-mail: [email protected] To contact the owner, e-mail: [email protected]
